+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATECSATECSATECSATEC
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

Retrofit Metering solution design and best practice from SATEC Australia improve compliance, visibility and operational efficiency.

Extended Range CTs With The EM133-XM Why Utilities Should Specify Headroom

Extended Range CTs With The EM133-XM: Why Utilities Should Specify Headroom

By SATEC (Australia) Pty Ltd | Current Transformers, Featured, Future-Proofing & Upgrades, Retrofit Metering, Utilities & Transmission | 0 comment | 6 October, 2026 | 0

Why utilities should pair extended range CTs with the NMI approved EM133-XM for load growth, better light load accuracy and fewer CT ratios to stock.

NMI Approved CT Connected Meters What The Approval Covers

NMI Approved CT Connected Meters: What The Approval Covers

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Current Transformers, Data Centres, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NMI Pattern Approval & NITP-14, Ports & Marine, Renewables & Storage, Residential Use, Retrofit Metering, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Water & Wastewater | 0 comment | 10 September, 2026 | 0

Understand what NMI approval covers for CT connected electricity meters in Australia, including accuracy class, sensor combinations, verification and billing use.

Commercial Solar Metering What The 1 MW SRES Change Means

Commercial Solar Metering: What The 1 MW SRES Change Means

By SATEC (Australia) Pty Ltd | Apartment Blocks, Clean Energy Regulator & LGCs, Commercial & Mixed-Use, Demand Management & Load Shedding, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, EV Charging & V2G, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, NMI Pattern Approval & NITP-14, Renewables & Storage, Retrofit Metering, Smart Energy Meters, Solar PV, Standards & Compliance, Sub-Metering & Billing | 0 comment | 12 August, 2026 | 0

The SRES expands to 1 MW from October 2026. Here is what bigger commercial solar means for metering, self consumption and site data.

Three Phase EV Charging and Load Management: How to Avoid Overloading Your Site

Three Phase EV Charging and Load Management: How to Avoid Overloading Your Site

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Demand Management & Load Shedding, Education & Campuses, Energy Analytics & Reporting, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Marinas, Mixed Use Facilities, Power Quality, Residential Use, Retrofit Metering, Smart Energy Meters, Transport & Infrastructure | Comments are Closed | 20 July, 2026 | 0

Learn how three phase EV charging and intelligent load management can prevent site overloads, control peak demand and support future EV growth.

Type 9 Energy Meters Explained: What Street Furniture Metering Means for Councils

Type 9 Energy Meters Explained: What Street Furniture Metering Means for Councils

By SATEC (Australia) Pty Ltd | Councils & Public Facilities, Energy Analytics & Reporting, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Knowledge Centre, Multi-Circuit Monitors, Retrofit Metering, Smart Energy Meters, Transport & Infrastructure | Comments are Closed | 30 June, 2026 | 0

Type 9 energy meters explained for councils and public infrastructure. Learn how street furniture metering supports better public asset energy data.

Smart Energy Monitoring for Supermarkets From Meter Data to Real Savings

Smart Energy Monitoring for Supermarkets: From Meter Data to Real Savings

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Councils & Public Facilities, Energy Analytics & Reporting, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Mixed Use Facilities, Power Quality, Retrofit Metering, Smart Energy Meters | Comments are Closed | 19 June, 2026 | 0

Discover how smart energy monitoring for supermarkets turns meter data into real savings with better visibility, faster fault detection and SATEC metering solutions.

What Is an Embedded Electricity Network Parent Meters, Child Meters and Tenant Billing Explained

What Is an Embedded Electricity Network? Parent Meters, Child Meters and Tenant Billing Explained

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Knowledge Centre, Meter Data Management (MDM), Mixed Use Facilities, Retrofit Metering, Smart Energy Meters, Sub-Metering & Billing, Tariffs & Costs | Comments are Closed | 16 June, 2026 | 0

Learn what an embedded electricity network is and how parent meters, child meters and tenant billing work in apartments, strata and commercial buildings.

Future Proofing For EV Adoption: Switchboard, Metering And Load Management

By SATEC (Australia) Pty Ltd | Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Demand Management & Load Shedding, Education & Campuses, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Mixed Use Facilities, Retrofit Metering, Smart Energy Meters | Comments are Closed | 11 June, 2026 | 0

Learn how future proofing for EV adoption starts with switchboard capacity, smart metering and load management for scalable EV charging infrastructure.

Microgrids For Emergency Services What Role Do Metering And Power Quality Play

Microgrids For Emergency Services: What Role Do Metering And Power Quality Play?

By SATEC (Australia) Pty Ltd | Alarming & Notifications, Battery Storage & BESS, Councils & Public Facilities, Demand Management & Load Shedding, Energy Analytics & Reporting, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Microgrids & Embedded Networks, Power Quality, Retrofit Metering, Smart Energy Meters, Standards & Compliance, Transport & Infrastructure, Uncategorized | Comments are Closed | 5 June, 2026 | 0

Explore how microgrids for emergency services use metering and power quality monitoring to improve resilience, uptime and energy control.

How To Use An Energy Consumption Monitor To Find Hidden Energy Waste

How To Use An Energy Consumption Monitor To Find Hidden Energy Waste

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Energy Analytics & Reporting, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, NMI Pattern Approval & NITP-14, Retrofit Metering, Smart Energy Meters, Sub-Metering & Billing | Comments are Closed | 2 June, 2026 | 0

Learn how an energy consumption monitor helps reveal hidden energy waste, reduce costs and improve visibility across commercial and industrial sites.

123

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • Can Your Smart Energy Meter Deliver Data for Detailed Analysis of Your Load Usage Profile?
  • Extended Range CTs With The EM133-XM: Why Utilities Should Specify Headroom
  • Meter Requirements For Embedded Network Billing In NSW: Class, Approval and the 2026 Reforms
  • Multi-Tenant Submetering in Australia: Meter Approval, Cost Allocation and Billing Compliance
  • NMI Approved CT Connected Meters: What The Approval Covers
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • Smart energy meter load profile showing interval demand data across a working day

    Can Your Smart Energy Meter Deliver Data for Detailed Analysis of Your Load Usage Profile?

    Can your smart energy meter deliver a detailed load profile? Learn the logging, memory and software you need to analyse demand circuit by circuit.

    8 October, 2026
  • Extended Range CTs With The EM133-XM Why Utilities Should Specify Headroom

    Extended Range CTs With The EM133-XM: Why Utilities Should Specify Headroom

    Why utilities should pair extended range CTs with the NMI approved EM133-XM for load growth, better light load accuracy and fewer CT ratios to stock.

    6 October, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC