+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

Multi-Tenant Submetering in Australia: Meter Approval, Cost Allocation and Billing Compliance

Multi-Tenant Submetering in Australia: Meter Approval, Cost Allocation and Billing Compliance

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NMI Pattern Approval & NITP-14, Residential Use, Sub-Metering & Billing, Uncategorized | 0 comment | 21 September, 2026 | 0

Multi-tenant submetering in Australia: when it is allowed, the NMI approval bills need, fair cost allocation and the compliance failures to avoid.

NMI Approved CT Connected Meters What The Approval Covers

NMI Approved CT Connected Meters: What The Approval Covers

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Current Transformers, Data Centres, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NMI Pattern Approval & NITP-14, Ports & Marine, Renewables & Storage, Residential Use, Retrofit Metering, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Water & Wastewater | 0 comment | 10 September, 2026 | 0

Understand what NMI approval covers for CT connected electricity meters in Australia, including accuracy class, sensor combinations, verification and billing use.

Commercial Solar Metering What The 1 MW SRES Change Means

Commercial Solar Metering: What The 1 MW SRES Change Means

By SATEC (Australia) Pty Ltd | Apartment Blocks, Clean Energy Regulator & LGCs, Commercial & Mixed-Use, Demand Management & Load Shedding, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, EV Charging & V2G, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, NMI Pattern Approval & NITP-14, Renewables & Storage, Retrofit Metering, Smart Energy Meters, Solar PV, Standards & Compliance, Sub-Metering & Billing | 0 comment | 12 August, 2026 | 0

The SRES expands to 1 MW from October 2026. Here is what bigger commercial solar means for metering, self consumption and site data.

Building Energy Management Analytics The Complete Guide for Commercial Buildings

Building Energy Management Analytics: The Complete Guide for Commercial Buildings

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Mixed Use Facilities, Residential Use, Smart Energy Meters, Tariffs & Costs | 0 comment | 10 August, 2026 | 0

Building energy management analytics explained for Australian commercial buildings. Find waste, cut demand charges and improve performance with SATEC and Expertpower.

How Solar, Batteries And EV Charging Work Within An Embedded Electricity Network

How Solar, Batteries And EV Charging Work Within An Embedded Electricity Network

By SATEC (Australia) Pty Ltd | Apartment Blocks, Battery Storage & BESS, Commercial & Mixed-Use, Embedded Networks, Energy Efficiency & NABERS, EV Charging & V2G, Featured, Future-Proofing & Upgrades, NABERS & NCC J9, Smart Energy Meters, Solar PV, Sub-Metering & Billing | 0 comment | 7 August, 2026 | 0

How solar, batteries and EV charging work inside an Australian embedded electricity network, and the metering each asset needs for billing and monitoring.

What Is A Power Energy Data Logger And When Should You Use One?

What Is A Power Energy Data Logger And When Should You Use One?

By SATEC (Australia) Pty Ltd | Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Demand Management & Load Shedding, Education & Campuses, Embedded Networks, Featured, Harmonics & Flicker, Hospitals & Healthcare, IEC 61000-4-30 Class A, Knowledge Centre, Manufacturing & Heavy Industry, Marinas, Mining & Resources, Mixed Use Facilities, Power Quality, Power Quality Analysers, Rail Infrastructure, Renewables & Storage, Smart Energy Meters, Transport & Infrastructure, Water & Wastewater | 0 comment | 5 August, 2026 | 0

Learn what a power logger measures, when to use one on Australian sites and how portable Class A logging diagnoses faults, demand and power quality problems.

How To Improve Load Factor And Reduce Electricity Demand Charges In Australia

How To Improve Load Factor And Reduce Electricity Demand Charges In Australia

By SATEC (Australia) Pty Ltd | Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Demand Management & Load Shedding, Energy Analytics & Reporting, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Microgrids & Embedded Networks, Mixed Use Facilities, Power Factor Correction, Rail Infrastructure, Smart Energy Meters, Tariffs & Costs, Telecommunications, Transport & Infrastructure, Water & Wastewater | 0 comment | 4 August, 2026 | 0

Learn how Australian businesses can improve load factor, cut electricity demand charges and choose the right meter for the job.

Smart Electricity Energy Meter vs Traditional Meter: What Is the Difference?

Smart Electricity Energy Meter vs Traditional Meter: What Is the Difference?

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Meter Data Management (MDM), Mixed Use Facilities, NMI Pattern Approval & NITP-14, Residential Use, Smart Energy Meters, Standards & Compliance | 0 comment | 31 July, 2026 | 0

Smart electricity meter vs traditional meter explained for Australian sites, covering interval data, NMI approval, the 2030 rollout and choosing the right meter.

What Is a Solar Monitoring System and How Does It Improve Solar Self Consumption

What Is a Solar Monitoring System and How Does It Improve Solar Self Consumption?

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Demand Management & Load Shedding, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Mixed Use Facilities, Renewables & Storage, Residential Use, Smart Energy Meters, Solar PV | 0 comment | 29 July, 2026 | 1

A solar monitoring system shows where your solar energy actually goes. Learn how it lifts solar self consumption for Australian homes and businesses.

Energy Audit vs Energy Monitoring: Why Australian Sites Need Both

Energy Audit vs Energy Monitoring: Why Australian Sites Need Both

By SATEC (Australia) Pty Ltd | Agriculture, Airports, Apartment Blocks, Aquaculture, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Knowledge Centre, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mining & Resources, Mixed Use Facilities, NABERS & NCC J9, Ports & Marine, Rail Infrastructure, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Transport & Infrastructure, Utilities & Transmission, Water & Wastewater | 0 comment | 28 July, 2026 | 0

Energy audits and energy monitoring do different jobs. See how AS 3598 audits and continuous metering work together for Australian sites.

123

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • Multi-Tenant Submetering in Australia: Meter Approval, Cost Allocation and Billing Compliance
  • NMI Approved CT Connected Meters: What The Approval Covers
  • MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants
  • Triplen Harmonics Explained: How Harmonic Spectra Reveal Neutral Conductor Overloading
  • Single Phasing In Three Phase Motors: Causes, Symptoms, Damage And Protection
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • Multi-Tenant Submetering in Australia: Meter Approval, Cost Allocation and Billing Compliance

    Multi-Tenant Submetering in Australia: Meter Approval, Cost Allocation and Billing Compliance

    Multi-tenant submetering in Australia: when it is allowed, the NMI approval bills need, fair cost allocation and the compliance failures to avoid.

    21 September, 2026
  • NMI Approved CT Connected Meters What The Approval Covers

    NMI Approved CT Connected Meters: What The Approval Covers

    Understand what NMI approval covers for CT connected electricity meters in Australia, including accuracy class, sensor combinations, verification and billing use.

    10 September, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC (Australia) Pty Ltd