+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

Power Factor Correction for VFD Loads: Why Capacitor Banks May Not Solve the Real Problem

Power Factor Correction for VFD Loads: Why Capacitor Banks May Not Solve the Real Problem

By SATEC (Australia) Pty Ltd | Agriculture, Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Featured, Future-Proofing & Upgrades, Manufacturing & Heavy Industry, Marinas, Mixed Use Facilities, Ports & Marine, Power Factor Correction, Power Quality, Power Quality Analysers, Rail Infrastructure, Renewables & Storage, Smart Energy Meters, Solar PV, Transport & Infrastructure, Utilities & Transmission, Water & Wastewater, Wind Generation | 0 comment | 17 July, 2026 | 0

Variable frequency drives (VFDs) are everywhere in Australian facilities. They run HVAC systems, pumps, fans, compressors and manufacturing equipment. They improve motor control and cut energy use by matching speed to demand. A site may see a poor power factor reading and reach for a capacitor bank. That can work for directly connected motors. VFDRead more

What Happened Before The Power Failure How Historical Energy Data Supports Root Cause Analysis

What Happened Before The Power Failure? How Historical Energy Data Supports Root Cause Analysis

By SATEC (Australia) Pty Ltd | Airports, Apartment Blocks, Commercial & Mixed-Use, Communications, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Harmonics & Flicker, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, Power Quality, Power Quality Analysers, Rail Infrastructure, Smart Energy Meters, Solar PV, Telecommunications, Transport & Infrastructure, Water & Wastewater | 0 comment | 16 July, 2026 | 0

Discover how historical energy data helps identify the causes of power failures, reconstruct events and support faster root cause analysis.

The EM133-XM Is Not Just A Meter It Is The Starting Point For Smarter Energy Decisions

The EM133-XM Is Not Just A Meter: It Is The Starting Point For Smarter Energy Decisions

By SATEC (Australia) Pty Ltd | Alarming & Notifications, Apartment Blocks, Commercial & Mixed-Use, Communications, Councils & Public Facilities, Data Centres, DIN Rail Meters, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NABERS & NCC J9, Ports & Marine, Renewables & Storage, Residential Use, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Water & Wastewater, Wind Generation | 0 comment | 14 July, 2026 | 0

Discover how the NMI approved SATEC EM133-XM turns accurate meter data into smarter energy decisions, clearer billing and better reporting.

What Is A Switch Test In Tenant Energy Metering Commissioning?

What Is A Switch Test In Tenant Energy Metering Commissioning?

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Data Centres, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Mixed Use Facilities, Smart Energy Meters, Sub-Metering & Billing | 0 comment | 10 July, 2026 | 0

Learn what a switch test is in tenant energy metering commissioning and why it matters for billing accuracy, tenant confidence and reliable energy data.

How Incorrect Energy Readings Can Affect Tenant Billing and Cost Recovery

How Incorrect Energy Readings Can Affect Tenant Billing and Cost Recovery

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Mixed Use Facilities, Multi-Circuit Monitors, Smart Energy Meters, Sub-Metering & Billing, Tariffs & Costs | 0 comment | 23 June, 2026 | 0

Incorrect energy readings can distort tenant billing and cost recovery. Learn how accurate metering helps reduce disputes, recover costs and improve energy transparency.

Energy Bills Reduction with Time-of-Use Tariffs How to Shift Load and Save

Energy Bills Reduction with Time-of-Use Tariffs: How to Shift Load and Save

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Featured, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, Ports & Marine, Smart Energy Meters, Sub-Metering & Billing, Tariffs & Costs | 0 comment | 17 June, 2026 | 0

Energy bills reduction starts with smarter timing. Learn how time-of-use tariffs work and how Expertpower with SATEC meters helps businesses shift load and save.

What Is an Embedded Electricity Network Parent Meters, Child Meters and Tenant Billing Explained

What Is an Embedded Electricity Network? Parent Meters, Child Meters and Tenant Billing Explained

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Mixed Use Facilities, Retrofit Metering, Smart Energy Meters, Sub-Metering & Billing | 0 comment | 16 June, 2026 | 0

Learn what an embedded electricity network is and how parent meters, child meters and tenant billing work in apartments, strata and commercial buildings.

Future Proofing For EV Adoption: Switchboard, Metering And Load Management

By SATEC (Australia) Pty Ltd | Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Mixed Use Facilities, Retrofit Metering, Smart Energy Meters | Comments are Closed | 11 June, 2026 | 0

Learn how future proofing for EV adoption starts with switchboard capacity, smart metering and load management for scalable EV charging infrastructure.

12

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • Commercial Solar Metering: What The 1 MW SRES Change Means
  • Wind Farm Power Quality: Harmonics, Voltage and Grid Stability in Australian Networks
  • Building Energy Management Analytics: The Complete Guide for Commercial Buildings
  • How Solar, Batteries And EV Charging Work Within An Embedded Electricity Network
  • What Is A Power Energy Data Logger And When Should You Use One?
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • Commercial Solar Metering What The 1 MW SRES Change Means

    Commercial Solar Metering: What The 1 MW SRES Change Means

    The SRES expands to 1 MW from October 2026. Here is what bigger commercial solar means for metering, self consumption and site data.

    12 August, 2026
  • Wind Farm Power Quality: Harmonics, Voltage and Grid Stability in Australian Networks

    Wind Farm Power Quality: Harmonics, Voltage and Grid Stability in Australian Networks

    Power quality in wind turbines explained for Australian conditions. Harmonics, voltage, system strength and NER compliance for wind farm operator.

    11 August, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC (Australia) Pty Ltd