+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

Sub-Metering & Billing solution design and best practice from SATEC Australia improve compliance, visibility and operational efficiency.

NMI Approved CT Connected Meters What The Approval Covers

NMI Approved CT Connected Meters: What The Approval Covers

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Current Transformers, Data Centres, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NMI Pattern Approval & NITP-14, Ports & Marine, Renewables & Storage, Residential Use, Retrofit Metering, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Water & Wastewater | 0 comment | 10 September, 2026 | 0

Understand what NMI approval covers for CT connected electricity meters in Australia, including accuracy class, sensor combinations, verification and billing use.

MID Approved Meters In Australia Why They Cannot Legally Bill Tenants

MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants

By SATEC (Australia) Pty Ltd | AS 62052/62053 Safety & Accuracy, Commercial & Mixed-Use, Embedded Networks, Featured, Future-Proofing & Upgrades, Knowledge Centre, NABERS & NCC J9, NMI Pattern Approval & NITP-14, Smart Energy Meters, Standards & Compliance, Sub-Metering & Billing | 0 comment | 17 August, 2026 | 0

MID approved energy meters Australia: Why European certification cannot legally bill tenants here, what NMI pattern approval requires and how to check any meter.

Commercial Solar Metering What The 1 MW SRES Change Means

Commercial Solar Metering: What The 1 MW SRES Change Means

By SATEC (Australia) Pty Ltd | Apartment Blocks, Clean Energy Regulator & LGCs, Commercial & Mixed-Use, Demand Management & Load Shedding, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, EV Charging & V2G, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, NMI Pattern Approval & NITP-14, Renewables & Storage, Retrofit Metering, Smart Energy Meters, Solar PV, Standards & Compliance, Sub-Metering & Billing | 0 comment | 12 August, 2026 | 0

The SRES expands to 1 MW from October 2026. Here is what bigger commercial solar means for metering, self consumption and site data.

How Solar, Batteries And EV Charging Work Within An Embedded Electricity Network

How Solar, Batteries And EV Charging Work Within An Embedded Electricity Network

By SATEC (Australia) Pty Ltd | Apartment Blocks, Battery Storage & BESS, Commercial & Mixed-Use, Embedded Networks, Energy Efficiency & NABERS, EV Charging & V2G, Featured, Future-Proofing & Upgrades, NABERS & NCC J9, Smart Energy Meters, Solar PV, Sub-Metering & Billing | 0 comment | 7 August, 2026 | 0

How solar, batteries and EV charging work inside an Australian embedded electricity network, and the metering each asset needs for billing and monitoring.

Four Quadrant Energy Metering In Australia How To Measure Import, Export And Reactive Energy

Four Quadrant Energy Metering In Australia: How To Measure Import, Export And Reactive Energy

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, Featured, Future-Proofing & Upgrades, NMI Pattern Approval & NITP-14, Power Factor Correction, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Sub-Metering & Billing, Wind Generation | 0 comment | 30 July, 2026 | 1

Four quadrant metering separates import, export and reactive energy at Australian sites. Learn how it works, why direction matters and which meters suit.

Why Accurate Microgrid Metering Is Essential for Regional Energy Systems

Why Accurate Microgrid Metering Is Essential for Regional Energy Systems

By SATEC (Australia) Pty Ltd | Councils & Public Facilities, Featured, Future-Proofing & Upgrades, Microgrids & Embedded Networks, Power Quality, Smart Energy Meters, Standards & Compliance, Sub-Metering & Billing | 0 comment | 24 July, 2026 | 0

Accurate microgrid metering underpins resilience, compliance and cost control for Australian regional communities. Learn where to measure and why.

Secondary Settlement Points Explained How Flexible Energy Trading Is Changing In Australia

Secondary Settlement Points Explained: How Flexible Energy Trading Is Changing In Australia

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Manufacturing & Heavy Industry, Mixed Use Facilities, Renewables & Storage, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Tariffs & Costs | 0 comment | 22 July, 2026 | 0

Learn how secondary settlement points could enable flexible energy trading, separate resource metering and greater provider choice in Australia.

Energy Management for Casinos and Integrated Resorts How to Control the Cost of 247 Operations

Energy Management for Casinos and Integrated Resorts: How to Control the Cost of 24/7 Operations

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Demand Management & Load Shedding, Energy Analytics & Reporting, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Mixed Use Facilities, Power Quality, Smart Energy Meters, Sub-Metering & Billing | Comments are Closed | 15 July, 2026 | 0

Learn how energy management for casinos can reduce 24/7 operating costs through smarter metering, demand control and energy visibility.

The EM133-XM Is Not Just A Meter It Is The Starting Point For Smarter Energy Decisions

The EM133-XM Is Not Just A Meter: It Is The Starting Point For Smarter Energy Decisions

By SATEC (Australia) Pty Ltd | Alarming & Notifications, Apartment Blocks, Commercial & Mixed-Use, Communications, Councils & Public Facilities, Data Centres, DIN Rail Meters, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NABERS & NCC J9, NMI Pattern Approval & NITP-14, Ports & Marine, Products & Hardware, Renewables & Storage, Residential Use, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Water & Wastewater, Wind Generation | Comments are Closed | 14 July, 2026 | 0

Discover how the NMI approved SATEC EM133-XM turns accurate meter data into smarter energy decisions, clearer billing and better reporting.

Why Local Energy Data Hosting Matters For Australian Businesses

Why Local Energy Data Hosting Matters For Australian Businesses

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Energy Analytics & Reporting, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, Marinas, Meter Data Management (MDM), Mixed Use Facilities, Smart Energy Meters, Software & Cloud, Sub-Metering & Billing | Comments are Closed | 13 July, 2026 | 0

Australian hosted energy data helps businesses improve confidence in energy reporting, billing and compliance with SATEC meters and Expertpower.

123

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • NMI Approved CT Connected Meters: What The Approval Covers
  • MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants
  • Triplen Harmonics Explained: How Harmonic Spectra Reveal Neutral Conductor Overloading
  • Single Phasing In Three Phase Motors: Causes, Symptoms, Damage And Protection
  • Commercial Solar Metering: What The 1 MW SRES Change Means
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • NMI Approved CT Connected Meters What The Approval Covers

    NMI Approved CT Connected Meters: What The Approval Covers

    Understand what NMI approval covers for CT connected electricity meters in Australia, including accuracy class, sensor combinations, verification and billing use.

    10 September, 2026
  • MID Approved Meters In Australia Why They Cannot Legally Bill Tenants

    MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants

    MID approved energy meters Australia: Why European certification cannot legally bill tenants here, what NMI pattern approval requires and how to check any meter.

    17 August, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC (Australia) Pty Ltd