+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

Education & Campuses energy metering and power quality solutions from SATEC Australia tailored architectures, standards compliance and case studies.

What Is A Power Energy Data Logger And When Should You Use One?

What Is A Power Energy Data Logger And When Should You Use One?

By SATEC (Australia) Pty Ltd | Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Featured, Harmonics & Flicker, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Mining & Resources, Mixed Use Facilities, Power Quality, Power Quality Analysers, Rail Infrastructure, Renewables & Storage, Smart Energy Meters, Transport & Infrastructure, Water & Wastewater | 0 comment | 5 August, 2026 | 0

Learn what a power logger measures, when to use one on Australian sites and how portable Class A logging diagnoses faults, demand and power quality problems.

Smart Electricity Energy Meter vs Traditional Meter: What Is the Difference?

Smart Electricity Energy Meter vs Traditional Meter: What Is the Difference?

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Mixed Use Facilities, Residential Use, Smart Energy Meters | 0 comment | 31 July, 2026 | 0

Smart electricity meter vs traditional meter explained for Australian sites, covering interval data, NMI approval, the 2030 rollout and choosing the right meter.

What Is a Solar Monitoring System and How Does It Improve Solar Self Consumption

What Is a Solar Monitoring System and How Does It Improve Solar Self Consumption?

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Mixed Use Facilities, Renewables & Storage, Smart Energy Meters, Solar PV | 0 comment | 29 July, 2026 | 1

A solar monitoring system shows where your solar energy actually goes. Learn how it lifts solar self consumption for Australian homes and businesses.

Energy Audit vs Energy Monitoring: Why Australian Sites Need Both

Energy Audit vs Energy Monitoring: Why Australian Sites Need Both

By SATEC (Australia) Pty Ltd | Agriculture, Airports, Apartment Blocks, Aquaculture, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mining & Resources, Mixed Use Facilities, NABERS & NCC J9, Ports & Marine, Rail Infrastructure, Renewables & Storage, Solar PV, Transport & Infrastructure, Utilities & Transmission, Water & Wastewater | 0 comment | 28 July, 2026 | 0

Energy audits and energy monitoring do different jobs. See how AS 3598 audits and continuous metering work together for Australian sites.

Secondary Settlement Points Explained How Flexible Energy Trading Is Changing In Australia

Secondary Settlement Points Explained: How Flexible Energy Trading Is Changing In Australia

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Featured, Future-Proofing & Upgrades, Manufacturing & Heavy Industry, Mixed Use Facilities, Renewables & Storage, Smart Energy Meters, Solar PV | 0 comment | 22 July, 2026 | 0

Learn how secondary settlement points could enable flexible energy trading, separate resource metering and greater provider choice in Australia.

Three Phase EV Charging and Load Management: How to Avoid Overloading Your Site

Three Phase EV Charging and Load Management: How to Avoid Overloading Your Site

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Energy Analytics & Reporting, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Marinas, Mixed Use Facilities, Power Quality, Residential Use, Retrofit Metering, Smart Energy Meters, Transport & Infrastructure | 0 comment | 20 July, 2026 | 0

Learn how three phase EV charging and intelligent load management can prevent site overloads, control peak demand and support future EV growth.

Power Factor Correction for VFD Loads: Why Capacitor Banks May Not Solve the Real Problem

Power Factor Correction for VFD Loads: Why Capacitor Banks May Not Solve the Real Problem

By SATEC (Australia) Pty Ltd | Agriculture, Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Featured, Future-Proofing & Upgrades, Manufacturing & Heavy Industry, Marinas, Mixed Use Facilities, Ports & Marine, Power Factor Correction, Power Quality, Power Quality Analysers, Rail Infrastructure, Renewables & Storage, Smart Energy Meters, Solar PV, Transport & Infrastructure, Utilities & Transmission, Water & Wastewater, Wind Generation | 0 comment | 17 July, 2026 | 0

Variable frequency drives (VFDs) are everywhere in Australian facilities. They run HVAC systems, pumps, fans, compressors and manufacturing equipment. They improve motor control and cut energy use by matching speed to demand. A site may see a poor power factor reading and reach for a capacitor bank. That can work for directly connected motors. VFDRead more

What Happened Before The Power Failure How Historical Energy Data Supports Root Cause Analysis

What Happened Before The Power Failure? How Historical Energy Data Supports Root Cause Analysis

By SATEC (Australia) Pty Ltd | Airports, Apartment Blocks, Commercial & Mixed-Use, Communications, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Harmonics & Flicker, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, Power Quality, Power Quality Analysers, Rail Infrastructure, Smart Energy Meters, Solar PV, Telecommunications, Transport & Infrastructure, Water & Wastewater | 0 comment | 16 July, 2026 | 0

Discover how historical energy data helps identify the causes of power failures, reconstruct events and support faster root cause analysis.

The EM133-XM Is Not Just A Meter It Is The Starting Point For Smarter Energy Decisions

The EM133-XM Is Not Just A Meter: It Is The Starting Point For Smarter Energy Decisions

By SATEC (Australia) Pty Ltd | Alarming & Notifications, Apartment Blocks, Commercial & Mixed-Use, Communications, Councils & Public Facilities, Data Centres, DIN Rail Meters, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NABERS & NCC J9, Ports & Marine, Renewables & Storage, Residential Use, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Water & Wastewater, Wind Generation | 0 comment | 14 July, 2026 | 0

Discover how the NMI approved SATEC EM133-XM turns accurate meter data into smarter energy decisions, clearer billing and better reporting.

Why Local Energy Data Hosting Matters For Australian Businesses

Why Local Energy Data Hosting Matters For Australian Businesses

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Marinas, Mixed Use Facilities, Smart Energy Meters, Software & Cloud, Sub-Metering & Billing | 0 comment | 13 July, 2026 | 0

Australian hosted energy data helps businesses improve confidence in energy reporting, billing and compliance with SATEC meters and Expertpower.

1234

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • What Is A Power Energy Data Logger And When Should You Use One?
  • How To Improve Load Factor And Reduce Electricity Demand Charges In Australia
  • NEM Metering Installation Types Explained: A Complete Guide To Types 1 To 9
  • Smart Electricity Energy Meter vs Traditional Meter: What Is the Difference?
  • Four Quadrant Energy Metering In Australia: How To Measure Import, Export And Reactive Energy
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • What Is A Power Energy Data Logger And When Should You Use One?

    What Is A Power Energy Data Logger And When Should You Use One?

    Learn what a power logger measures, when to use one on Australian sites and how portable Class A logging diagnoses faults, demand and power quality problems.

    5 August, 2026
  • How To Improve Load Factor And Reduce Electricity Demand Charges In Australia

    How To Improve Load Factor And Reduce Electricity Demand Charges In Australia

    Learn how Australian businesses can improve load factor, cut electricity demand charges and choose the right meter for the job.

    4 August, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC (Australia) Pty Ltd