+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

How To Improve Load Factor And Reduce Electricity Demand Charges In Australia

How To Improve Load Factor And Reduce Electricity Demand Charges In Australia

By SATEC (Australia) Pty Ltd | Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Demand Management & Load Shedding, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Microgrids & Embedded Networks, Mixed Use Facilities, Power Factor Correction, Rail Infrastructure, Smart Energy Meters, Telecommunications, Transport & Infrastructure, Water & Wastewater | 0 comment | 4 August, 2026 | 0

Learn how Australian businesses can improve load factor, cut electricity demand charges and choose the right meter for the job.

NEM Metering Installation Types Explained A Complete Guide To Types 1 To 9

NEM Metering Installation Types Explained: A Complete Guide To Types 1 To 9

By SATEC (Australia) Pty Ltd | Featured, Future-Proofing & Upgrades, Smart Energy Meters, Standards & Compliance | 0 comment | 3 August, 2026 | 0

NEM metering installation types explained from Type 1 to Type 9, including the new Type 8 and Type 9 categories and what they mean for Australian sites.

Smart Electricity Energy Meter vs Traditional Meter: What Is the Difference?

Smart Electricity Energy Meter vs Traditional Meter: What Is the Difference?

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Mixed Use Facilities, Residential Use, Smart Energy Meters | 0 comment | 31 July, 2026 | 0

Smart electricity meter vs traditional meter explained for Australian sites, covering interval data, NMI approval, the 2030 rollout and choosing the right meter.

Four Quadrant Energy Metering In Australia How To Measure Import, Export And Reactive Energy

Four Quadrant Energy Metering In Australia: How To Measure Import, Export And Reactive Energy

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, Featured, Future-Proofing & Upgrades, NMI Pattern Approval & NITP-14, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | 0 comment | 30 July, 2026 | 1

Four quadrant metering separates import, export and reactive energy at Australian sites. Learn how it works, why direction matters and which meters suit.

What Is a Solar Monitoring System and How Does It Improve Solar Self Consumption

What Is a Solar Monitoring System and How Does It Improve Solar Self Consumption?

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Embedded Networks, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Mixed Use Facilities, Renewables & Storage, Smart Energy Meters, Solar PV | 0 comment | 29 July, 2026 | 1

A solar monitoring system shows where your solar energy actually goes. Learn how it lifts solar self consumption for Australian homes and businesses.

Energy Audit vs Energy Monitoring: Why Australian Sites Need Both

Energy Audit vs Energy Monitoring: Why Australian Sites Need Both

By SATEC (Australia) Pty Ltd | Agriculture, Airports, Apartment Blocks, Aquaculture, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mining & Resources, Mixed Use Facilities, NABERS & NCC J9, Ports & Marine, Rail Infrastructure, Renewables & Storage, Solar PV, Transport & Infrastructure, Utilities & Transmission, Water & Wastewater | 0 comment | 28 July, 2026 | 0

Energy audits and energy monitoring do different jobs. See how AS 3598 audits and continuous metering work together for Australian sites.

NABERS Metering for Child Care Centres: What Australian Operators Need to Know

NABERS Metering for Child Care Centres: What Australian Operators Need to Know

By SATEC (Australia) Pty Ltd | Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Smart Energy Meters, Standards & Compliance | 0 comment | 27 July, 2026 | 0

Learn how NABERS metering for child care centres measures energy performance and how accurate metering can help operators reduce costs and emissions.

Why Accurate Microgrid Metering Is Essential for Regional Energy Systems

Why Accurate Microgrid Metering Is Essential for Regional Energy Systems

By SATEC (Australia) Pty Ltd | Councils & Public Facilities, Featured, Future-Proofing & Upgrades, Microgrids & Embedded Networks, Power Quality, Smart Energy Meters | 0 comment | 24 July, 2026 | 0

Accurate microgrid metering underpins resilience, compliance and cost control for Australian regional communities. Learn where to measure and why.

Battery Round-Trip Efficiency Explained Where Stored Energy Is Lost

Battery Round-Trip Efficiency Explained: Where Stored Energy Is Lost

By SATEC (Australia) Pty Ltd | AEMO MASS & FCAS, Battery Storage & BESS, Featured, Future-Proofing & Upgrades, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | 0 comment | 23 July, 2026 | 0

Learn how battery round-trip efficiency is calculated, where energy is lost and how accurate SATEC metering supports BESS performance analysis in Australia.

Secondary Settlement Points Explained How Flexible Energy Trading Is Changing In Australia

Secondary Settlement Points Explained: How Flexible Energy Trading Is Changing In Australia

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Education & Campuses, Featured, Future-Proofing & Upgrades, Manufacturing & Heavy Industry, Mixed Use Facilities, Renewables & Storage, Smart Energy Meters, Solar PV | 0 comment | 22 July, 2026 | 0

Learn how secondary settlement points could enable flexible energy trading, separate resource metering and greater provider choice in Australia.

123

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • How To Improve Load Factor And Reduce Electricity Demand Charges In Australia
  • NEM Metering Installation Types Explained: A Complete Guide To Types 1 To 9
  • Smart Electricity Energy Meter vs Traditional Meter: What Is the Difference?
  • Four Quadrant Energy Metering In Australia: How To Measure Import, Export And Reactive Energy
  • What Is a Solar Monitoring System and How Does It Improve Solar Self Consumption?
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • How To Improve Load Factor And Reduce Electricity Demand Charges In Australia

    How To Improve Load Factor And Reduce Electricity Demand Charges In Australia

    Learn how Australian businesses can improve load factor, cut electricity demand charges and choose the right meter for the job.

    4 August, 2026
  • NEM Metering Installation Types Explained A Complete Guide To Types 1 To 9

    NEM Metering Installation Types Explained: A Complete Guide To Types 1 To 9

    NEM metering installation types explained from Type 1 to Type 9, including the new Type 8 and Type 9 categories and what they mean for Australian sites.

    3 August, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC (Australia) Pty Ltd