Energy registers: quantities, capacity and meter models
Start with what an electrical energy register measures, then distinguish native totals, programmable billing registers, tariffs and pulse counters.
PAS · WRITTEN LESSONS
Electrical energy first: sources, model capacities, tariffs and consumption. Then configure and check external water/gas pulses in kL and m³, with worked examples and fault-finding.
Detailed written lessons; live pulse commissioning and recordings pending.
Start with what an electrical energy register measures, then distinguish native totals, programmable billing registers, tariffs and pulse counters.
Trace an electrical measurement into a billing register, give it a clear purpose, and check the calendar before relying on tariff totals.
Use matched readings to calculate consumption and average power, while separating resets, scaling and overlapping totals.
Follow the water meter’s pulse output through a fitted digital input into a correctly scaled volume register, then verify the result with a known increment.
Configure the pulse-volume meaning carefully, and distinguish measured gas volume from corrected volume and gas energy.
Finish with a commissioning record, a historical-data check and a fault-finding sequence that preserves the original readings.
| Revision | Change and reason | Review / supersedes |
|---|---|---|
| 20261108-energy-v1 8 November 2026 | Added electricity-first energy and water/gas pulse-register lessons. Explain model-specific capacity, correct units, PAS setup and consumption checks. | Primary-source and configured Product Master consultation completed; independent artifact review follows. None |