+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

Renewables & Storage energy metering and power quality solutions from SATEC Australia tailored architectures, standards compliance and case studies.

Active vs Passive Power Quality Correction: Which Is Right for Your Site?

By SATEC (Australia) Pty Ltd | EV Charging & V2G, Featured, Future-Proofing & Upgrades, Harmonics & Flicker, Power Factor Correction, Power Quality, Power Quality Analysers, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Wind Generation | Comments are Closed | 14 April, 2026 | 0

Compare active and passive power quality correction, learn which option suits your site best and see how SATEC metering supports better power quality decisions.

An EV charging station using DC energy and flux gate sensors for accuracy

Flux Gate Current Sensors for DC Energy Metering

By SATEC (Australia) Pty Ltd | Current Transformers, DC Energy Metering, Energy Analytics & Reporting, EV Charging & V2G, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, Renewables & Storage, Sensors & CTs, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 9 April, 2026 | 0

Learn how flux gate current sensors improve DC energy metering accuracy and see how SATEC meters and Expertpower help turn detailed electrical data into practical insight.

Woman holding a child charges her EV. DC energy monitoring is key for EV charging facilities.

Why DC Energy Monitoring Is Key to Electrification and Behind-the-Meter Systems

By SATEC (Australia) Pty Ltd | AS 62052/62053 Safety & Accuracy, Battery Storage & BESS, DC Energy Metering, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Microgrids & Embedded Networks, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Wind Generation | Comments are Closed | 3 April, 2026 | 0

DC energy monitoring is essential for electrification and behind-the-meter systems, improving visibility, efficiency, reliability and control.

Solar panels located on the shelter of a car park where DC monitoring is common

Why Multiple Input DC Monitoring Is Ideal For Energy Systems

By SATEC (Australia) Pty Ltd | DC Energy Metering, Featured, Future-Proofing & Upgrades, Multi-Circuit Monitors, Renewables & Storage, Retrofit Metering, Smart Energy Meters | Comments are Closed | 23 March, 2026 | 0

Learn why 3 input DC monitoring is ideal for modern energy systems and how SATEC metering solutions help improve visibility across multiple DC circuits.

Workers inspecting solar panels where Solar Power Monitoring has helped spot underperformance

How Solar Power Monitoring Systems Help Spot Underperforming Panels, Strings and Inverters

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, DC Energy Metering, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Large-scale Generation Certificate (LGC), Renewables & Storage, Solar PV, Standards & Compliance | Comments are Closed | 18 March, 2026 | 0

Discover how solar power monitoring systems help identify underperforming panels, strings and inverters early with better visibility, diagnostics and accurate metering.

DC meter in a renewables setting

Can a DC Meter Support Battery Storage Monitoring?

By SATEC (Australia) Pty Ltd | AS 62052/62053 Safety & Accuracy, Battery Storage & BESS, DC Energy Metering, Energy Analytics & Reporting, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 17 March, 2026 | 0

Can a DC meter support battery storage monitoring? Learn why DC metering matters in BESS and how SATEC meters and Expertpower improve visibility and control.

An EV charging station showing Why EV Charging Infrastructure Now Requires a Power Quality Audit

Why EV Charging Infrastructure Now Requires a Power Quality Audit

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Harmonics & Flicker, Power Quality, Power Quality Compliance, Renewables & Storage, Smart Energy Meters, Standards & Compliance | Comments are Closed | 13 March, 2026 | 0

Electric vehicle adoption is accelerating across Australia and charging infrastructure is expanding with it.

DC Meters For EV Chargers

DC Meters For EV Chargers: What They Do, Why They Matter And How To Choose

By SATEC (Australia) Pty Ltd | DC Energy Metering, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Renewables & Storage, Smart Energy Meters, Standards & Compliance, Sub-Metering & Billing | Comments are Closed | 23 February, 2026 | 0

DC meters for EV chargers ensure accurate billing, compliance and performance insights. Learn how they work, what to choose and why SATEC fits.

Solar panels on a commercial building where Solar Energy Monitoring vs Inverter Monitoring is a consideration

Solar Energy Monitoring vs Inverter Monitoring: What’s the Difference?

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Energy Analytics & Reporting, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Renewables & Storage, Smart Energy Meters, Solar PV | Comments are Closed | 13 February, 2026 | 0

Solar energy monitoring vs inverter monitoring: Learn the key differences, what each can and can’t measure and why metering delivers the clearest performance and savings view.

Power Consumption Metering for EV Chargers

Power Consumption Metering for EV Chargers: Managing Demand, Billing and Capacity Constraints

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Councils & Public Facilities, DC Energy Metering, Demand Management & Load Shedding, Education & Campuses, Energy Efficiency & NABERS, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Renewables & Storage, Smart Energy Meters, Sub-Metering & Billing, Tariffs & Costs | Comments are Closed | 12 February, 2026 | 0

Power Consumption Metering for EV Chargers helps manage demand, enable accurate billing, and avoid capacity constraints. Learn practical approaches and metering solutions.

12345

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants
  • Triplen Harmonics Explained: How Harmonic Spectra Reveal Neutral Conductor Overloading
  • Single Phasing In Three Phase Motors: Causes, Symptoms, Damage And Protection
  • Commercial Solar Metering: What The 1 MW SRES Change Means
  • Wind Farm Power Quality: Harmonics, Voltage and Grid Stability in Australian Networks
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • MID Approved Meters In Australia Why They Cannot Legally Bill Tenants

    MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants

    MID approved energy meters Australia: Why European certification cannot legally bill tenants here, what NMI pattern approval requires and how to check any meter.

    17 August, 2026
  • Triplen Harmonics Explained How Harmonic Spectra Reveal Neutral Conductor Overloading

    Triplen Harmonics Explained: How Harmonic Spectra Reveal Neutral Conductor Overloading

    Triplen harmonics add in the neutral instead of cancelling. Learn how harmonic spectra reveal neutral conductor overloading in Australian installations.

    14 August, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC (Australia) Pty Ltd