+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

Wind Generation metering and PQ insights design, compliance and integration patterns for the Australian grid.

Wind Farm Power Quality: Harmonics, Voltage and Grid Stability in Australian Networks

Wind Farm Power Quality: Harmonics, Voltage and Grid Stability in Australian Networks

By SATEC (Australia) Pty Ltd | Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Harmonics & Flicker, IEC 61000-4-30 Class A, Power Quality, Power Quality Analysers, Power Quality Compliance, Renewables & Storage, Smart Energy Meters, Standards & Compliance, Wind Generation | 0 comment | 11 August, 2026 | 0

Power quality in wind turbines explained for Australian conditions. Harmonics, voltage, system strength and NER compliance for wind farm operator.

Four Quadrant Energy Metering In Australia How To Measure Import, Export And Reactive Energy

Four Quadrant Energy Metering In Australia: How To Measure Import, Export And Reactive Energy

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, Featured, Future-Proofing & Upgrades, NMI Pattern Approval & NITP-14, Power Factor Correction, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Sub-Metering & Billing, Wind Generation | 0 comment | 30 July, 2026 | 1

Four quadrant metering separates import, export and reactive energy at Australian sites. Learn how it works, why direction matters and which meters suit.

Battery Round-Trip Efficiency Explained Where Stored Energy Is Lost

Battery Round-Trip Efficiency Explained: Where Stored Energy Is Lost

By SATEC (Australia) Pty Ltd | AEMO MASS & FCAS, Battery Storage & BESS, DC Energy Metering, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Knowledge Centre, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | 0 comment | 23 July, 2026 | 0

Learn how battery round-trip efficiency is calculated, where energy is lost and how accurate SATEC metering supports BESS performance analysis in Australia.

Power Factor Correction for VFD Loads: Why Capacitor Banks May Not Solve the Real Problem

Power Factor Correction for VFD Loads: Why Capacitor Banks May Not Solve the Real Problem

By SATEC (Australia) Pty Ltd | Agriculture, Airports, Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Harmonics & Flicker, Manufacturing & Heavy Industry, Marinas, Mixed Use Facilities, Ports & Marine, Power Factor Correction, Power Quality, Power Quality Analysers, Rail Infrastructure, Renewables & Storage, Smart Energy Meters, Solar PV, Transport & Infrastructure, Utilities & Transmission, Water & Wastewater, Wind Generation | 0 comment | 17 July, 2026 | 0

Variable frequency drives (VFDs) are everywhere in Australian facilities. They run HVAC systems, pumps, fans, compressors and manufacturing equipment. They improve motor control and cut energy use by matching speed to demand. A site may see a poor power factor reading and reach for a capacitor bank. That can work for directly connected motors. VFDRead more

The EM133-XM Is Not Just A Meter It Is The Starting Point For Smarter Energy Decisions

The EM133-XM Is Not Just A Meter: It Is The Starting Point For Smarter Energy Decisions

By SATEC (Australia) Pty Ltd | Alarming & Notifications, Apartment Blocks, Commercial & Mixed-Use, Communications, Councils & Public Facilities, Data Centres, DIN Rail Meters, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NABERS & NCC J9, NMI Pattern Approval & NITP-14, Ports & Marine, Products & Hardware, Renewables & Storage, Residential Use, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Water & Wastewater, Wind Generation | 0 comment | 14 July, 2026 | 0

Discover how the NMI approved SATEC EM133-XM turns accurate meter data into smarter energy decisions, clearer billing and better reporting.

LGCs, Load Growth and the Case for Better Energy Data

LGCs, Load Growth and the Case for Better Energy Data

By SATEC (Australia) Pty Ltd | Clean Energy Regulator & LGCs, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Large-scale Generation Certificate (LGC), Power Quality, Renewable Certificates (LGC) Metering, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 26 June, 2026 | 0

LGC energy data matters as load growth and renewable energy claims become more complex. See why smarter metering helps businesses act with confidence.

What Is Frequency Control Ancillary Services (FCAS)

What Is Frequency Control Ancillary Services (FCAS)?

By SATEC (Australia) Pty Ltd | AEMO MASS & FCAS, Energy Analytics & Reporting, FCAS Compliance & MASS, Featured, Frequency Control Ancillary Service (FCAS), Future-Proofing & Upgrades, Knowledge Centre, Manufacturing & Heavy Industry, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Utilities & Transmission, Wind Generation | Comments are Closed | 15 June, 2026 | 0

Learn what Frequency Control Ancillary Services are, why FCAS matters for grid stability and how SATEC metering supports accurate energy monitoring.

Urban Renewable Energy Zones (UREZs)

What Are Urban Renewable Energy Zones (UREZs)?

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Distribution Networks, Education & Campuses, Energy Analytics & Reporting, Energy Efficiency & NABERS, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, NABERS & NCC J9, Ports & Marine, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 12 June, 2026 | 0

Learn what UREZs are, why Urban Renewable Energy Zones matter for cities and how smart metering helps make local renewable energy visible and manageable.

DC Power Meter in Microgrids and Renewable Energy Systems

The Role of the DC Power Meter in Microgrids and Renewable Energy Systems

By SATEC (Australia) Pty Ltd | DC Energy Metering, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Microgrids & Embedded Networks, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 19 May, 2026 | 0

Explore the role of the DC power meter in microgrids and renewable energy systems and how SATEC delivers accurate DC metering solutions.

Transmission towers at dusk. Shadow Pricing In Australia's Energy Market Reveals The True Cost Of Grid Congestion

How Shadow Pricing In Australia’s Energy Market Reveals The True Cost Of Grid Congestion

By SATEC (Australia) Pty Ltd | AEMO MASS & FCAS, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, IEC 61000-4-30 Class A, NMI Pattern Approval & NITP-14, Renewables & Storage, Smart Energy Meters, Solar PV, Tariffs & Costs, Utilities & Transmission, Wind Generation | Comments are Closed | 21 April, 2026 | 0

Learn how shadow pricing reveals the true cost of grid congestion and why accurate metering from SATEC helps businesses respond with better energy visibility.

123

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants
  • Triplen Harmonics Explained: How Harmonic Spectra Reveal Neutral Conductor Overloading
  • Single Phasing In Three Phase Motors: Causes, Symptoms, Damage And Protection
  • Commercial Solar Metering: What The 1 MW SRES Change Means
  • Wind Farm Power Quality: Harmonics, Voltage and Grid Stability in Australian Networks
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • MID Approved Meters In Australia Why They Cannot Legally Bill Tenants

    MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants

    MID approved energy meters Australia: Why European certification cannot legally bill tenants here, what NMI pattern approval requires and how to check any meter.

    17 August, 2026
  • Triplen Harmonics Explained How Harmonic Spectra Reveal Neutral Conductor Overloading

    Triplen Harmonics Explained: How Harmonic Spectra Reveal Neutral Conductor Overloading

    Triplen harmonics add in the neutral instead of cancelling. Learn how harmonic spectra reveal neutral conductor overloading in Australian installations.

    14 August, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC (Australia) Pty Ltd