+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATECSATECSATECSATEC
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

DC Power Meter in Microgrids and Renewable Energy Systems

The Role of the DC Power Meter in Microgrids and Renewable Energy Systems

By SATEC (Australia) Pty Ltd | DC Energy Metering, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Microgrids & Embedded Networks, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 19 May, 2026 | 0

Explore the role of the DC power meter in microgrids and renewable energy systems and how SATEC delivers accurate DC metering solutions.

An EV charging station using DC energy and flux gate sensors for accuracy

Flux Gate Current Sensors for DC Energy Metering

By SATEC (Australia) Pty Ltd | Current Transformers, DC Energy Metering, Energy Analytics & Reporting, EV Charging & V2G, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, Renewables & Storage, Sensors & CTs, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 9 April, 2026 | 0

Learn how flux gate current sensors improve DC energy metering accuracy and see how SATEC meters and Expertpower help turn detailed electrical data into practical insight.

DC meter in a renewables setting

Can a DC Meter Support Battery Storage Monitoring?

By SATEC (Australia) Pty Ltd | AS 62052/62053 Safety & Accuracy, Battery Storage & BESS, DC Energy Metering, Energy Analytics & Reporting, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 17 March, 2026 | 0

Can a DC meter support battery storage monitoring? Learn why DC metering matters in BESS and how SATEC meters and Expertpower improve visibility and control.

DC Meters For EV Chargers

DC Meters For EV Chargers: What They Do, Why They Matter And How To Choose

By SATEC (Australia) Pty Ltd | DC Energy Metering, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Renewables & Storage, Smart Energy Meters, Standards & Compliance, Sub-Metering & Billing | Comments are Closed | 23 February, 2026 | 0

DC meters for EV chargers ensure accurate billing, compliance and performance insights. Learn how they work, what to choose and why SATEC fits.

Battery Energy Storage Systems (BESS)

Battery Energy Storage Systems (BESS): The DC Metering Checklist

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, DC Energy Metering, Energy Analytics & Reporting, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Integrations & API, Knowledge Centre, Power Quality, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Wind Generation | Comments are Closed | 22 January, 2026 | 0

BESS projects succeed or fail on measurement. Use this DC metering checklist to improve accuracy, integration, commissioning and performance reporting with confidence.

Hall Effect Sensors for DC Meters used on Australian rail network

Hall Effect Sensors for DC Meters: How They Work and Why They Matter

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, Current Transformers, DC Energy Metering, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Knowledge Centre, Sensors & CTs, Smart Energy Meters, Solar PV | Comments are Closed | 23 December, 2025 | 0

Hall Effect Sensors enable accurate, isolated DC current measurement for EV charging, batteries and solar. Learn how they work in DC meters and what to consider when choosing a solution.

AC vs DC Power Differences and Applications

AC vs DC Power: Differences and Applications

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, DC Energy Metering, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Knowledge Centre, Power-System Technologies, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Wind Generation | Comments are Closed | 4 December, 2025 | 0

Learn the key differences between AC and DC power, where each is used and how modern metering helps you manage both in today’s renewable-rich energy systems.

DC Shunts and AS/IEC Compliance

DC Shunts and AS/IEC Compliance: What You Really Need To Know

By SATEC (Australia) Pty Ltd | AS 62052/62053 Safety & Accuracy, DC Energy Metering, Featured, Sensors & CTs, Standards & Compliance | Comments are Closed | 2 December, 2025 | 0

Understand DC shunt AS 62052-11, IEC 62053-41 and AS 62052-31 requirements and how they impact accurate, safe DC energy metering.

Fluxgate Current Sensors: Precision DC Electricity Meters for Australian Renewable Grids

Fluxgate Current Sensors: Precision DC Electricity Meters for Australian Renewable Grids

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, DC Energy Metering, EV Charging & V2G, Featured, Renewables & Storage, Sensors & CTs, Smart Energy Meters, Solar PV | Comments are Closed | 21 November, 2025 | 0

Discover how fluxgate technology enables accuracy in DC electricity metering for solar, storage & EV infrastructure across Australian utility networks.

AC vs DC Electricity Meters Industry Applications

AC vs DC Electricity Meters: Industry Applications

By SATEC (Australia) Pty Ltd | AS 62052/62053 Safety & Accuracy, Battery Storage & BESS, Data Centres, DC Energy Metering, Featured, Knowledge Centre, Manufacturing & Heavy Industry, Products & Hardware, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 11 November, 2025 | 0

Discover differences between AC and DC energy meters in circuit design, measurement principles and industry applications across Australian renewable energy, data centres and industrial sectors.

12

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • Can Your Smart Energy Meter Deliver Data for Detailed Analysis of Your Load Usage Profile?
  • Extended Range CTs With The EM133-XM: Why Utilities Should Specify Headroom
  • Meter Requirements For Embedded Network Billing In NSW: Class, Approval and the 2026 Reforms
  • Multi-Tenant Submetering in Australia: Meter Approval, Cost Allocation and Billing Compliance
  • NMI Approved CT Connected Meters: What The Approval Covers
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • Smart energy meter load profile showing interval demand data across a working day

    Can Your Smart Energy Meter Deliver Data for Detailed Analysis of Your Load Usage Profile?

    Can your smart energy meter deliver a detailed load profile? Learn the logging, memory and software you need to analyse demand circuit by circuit.

    8 October, 2026
  • Extended Range CTs With The EM133-XM Why Utilities Should Specify Headroom

    Extended Range CTs With The EM133-XM: Why Utilities Should Specify Headroom

    Why utilities should pair extended range CTs with the NMI approved EM133-XM for load growth, better light load accuracy and fewer CT ratios to stock.

    6 October, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC