ExpertpowerSATEC Australia

EXPERTPOWER · U104

Compare several metered loads over one day

Select three demo loads, read one complete day, compare their totals, isolate a load and use drag zoom and Reset zoom.

Jump to a topic

About this recording

Recorded 10 November 2026. Emma narration. This demonstration changes viewing controls only.

Recorded in the vendor Demo Site. Main air conditioning, Rooms air conditioning and Workstations sockets retain their original English demo names.

The films use the actual recorded interface and unchanged Emma narration. They demonstrate viewing controls and do not change XPW configuration.

Use captions, pause and rewind. Fullscreen helps with small interface labels. Options and data can vary by account and selected source.

1. Confirm the selected loads

Check that Main air conditioning, Rooms air conditioning and Workstations sockets appear in Current Selection. They are three metered loads within one demo site. The exercise does not establish that they represent every load in a building.

2. Choose one complete day

Open the date range, select Pick Day, choose 9 November 2026, and apply and close the picker. The demo displays 11/9/2026–11/10/2026, with Hours beside it. The reporting period ends at the following midnight. Use calendar selection and check the result; this demo displays the month before the day.

3. Use the graph and summary for different questions

The Consumption Graph combines the selected loads and groups their energy into hourly intervals. It does not display three separate meter traces. The corresponding table contains interval readings. The Consumption Summary separates the loads: the displayed demo totals for this day are Main air conditioning 56 kWh, Rooms air conditioning 5 kWh and Workstations sockets 52 kWh, totalling 113 kWh. These are readings from the example, not a forecast or a savings claim. Energy in kWh over an hour is different from an instantaneous power reading in kW.

4. Isolate a load, then restore the comparison

Clicking an already selected tree item removes it from the selection in this demo; Ctrl is not required. Leave Workstations sockets selected and check the resulting dates and resolution. The recorded view returns to Days. Add Main air conditioning back and compare the separate summary rows. Restore Rooms air conditioning, select Pick Day again and confirm that Hours has returned. Selection changes can affect the displayed resolution.

5. Drag to zoom, then reset

Press and hold the left mouse button inside the graph, drag across the interval to inspect and release. Reset zoom appears. The reporting day remains the same: the plot is showing a closer view. Select Reset zoom to restore the full-day plot. A pattern can guide a question about equipment use, but it does not establish a fault.

Transcript and references

Let's look at one complete day in our small commercial building. First, check Current Selection. Main air conditioning, Rooms air conditioning and Workstations sockets are selected. These are loads within one demo site, so this exercise compares parts of a building.

Open the date range, choose Pick Day, and select the ninth of November, twenty twenty-six. Apply and close the picker. The range now runs from the ninth to the tenth of November, with Hours beside it. That is one complete day, ending at the following midnight. This demo displays the month before the day, so use the picker and check the resulting dates rather than guessing their order.

The Consumption Graph shows the combined energy for the selected loads, grouped into hourly intervals. The table below gives the corresponding interval readings. Kilowatt-hours measure energy used during an interval; the height of an hourly energy bar is not an instantaneous kilowatt reading.

The Consumption Summary separates the selected loads. For this day, Main air conditioning shows fifty-six kilowatt-hours, Rooms air conditioning shows five, and Workstations sockets shows fifty-two. Together they total one hundred and thirteen kilowatt-hours. Those are the displayed demo totals for this selection and day.

Notice how this layout answers two different questions: the combined graph shows when energy was used, while the summary shows how much each selected load contributed. Check both before deciding what to investigate.

To understand a combined pattern, simplify the selection. In this demo, clicking an already selected tree item removes it from the selection. We leave Workstations sockets selected on its own. Check the selection list, dates and resolution together. This screen has returned to Days, showing the socket load's daily energy without the air conditioning energy being added to it.

Next, add Main air conditioning back alongside Workstations sockets for the same day. Compare their separate rows in the summary. We then restore Rooms air conditioning as the third load, use Pick Day again and check that Hours has returned. Do not assume the resolution stayed unchanged when the selection changed. Comparing loads helps focus questions about equipment use; it does not establish a fault.

Here is a useful way to inspect part of the graph. Press and hold the left mouse button inside the plot, drag across the time range you want to examine, then release. The graph zooms into that section and a Reset zoom control appears. The selected reporting day has stayed the same. This is a closer view of the plot, rather than a new reporting period.

Use the expanded view to read the interval labels more comfortably. When you have finished, click Reset zoom to restore the full-day graph. For an operator, this means you can move from the day's overall shape to a smaller window, then regain the wider context with one control. In the next lesson, we will widen the date range and look for repeating patterns.

References