ExpertpowerSATEC Australia

EXPERTPOWER · U105

Find patterns over several days

Widen the reporting period, compare daily patterns and drill from a month through weeks and days to hours, then return.

Jump to a topic

About this recording

Recorded 10 November 2026. Emma narration. This demonstration changes viewing controls only.

Recorded in the vendor Demo Site. Main air conditioning, Rooms air conditioning and Workstations sockets retain their original English demo names.

The films use the actual recorded interface and unchanged Emma narration. They demonstrate viewing controls and do not change XPW configuration.

Use captions, pause and rewind. Fullscreen helps with small interface labels. Options and data can vary by account and selected source.

1. Widen the selected period

Keep the same three loads selected. Choose a start of 2 November 2026 and an end of 10 November, apply the calendar selection, and check that the resolution is Days. The complete days displayed run from 2 through 9 November.

2. Compare patterns with operating evidence

Each group now represents a day. In this demonstration, 4 November displays 192 kWh. The bars for 6 and 7 November are lower, before 8 November rises again. Compare the dates with the actual occupancy, shutdown and equipment schedule, and check for gaps or estimated values. The shape of the chart alone does not identify a cause or prove a weekend or holiday schedule.

3. Open one day and return

Clicking the 9 November daily bar opens the 9–10 November range with Hours. Check both labels. Back to Previous date restores the 2–10 November comparison.

4. Drill from a month through weeks and days

In the recorded October example, clicking the monthly energy bar changes Months to Weeks while retaining the monthly reporting range. Clicking the week beginning 11 October opens 11–18 October with Days. Clicking 12 October opens 12–13 October with Hours. Available detail depends on the current view and data; this lesson does not claim reliable drill-down below hourly detail.

5. Return through the investigation

Back to Previous date reverses the recorded drill-down levels: from hours to the selected week of daily bars, then to weekly bars for the month, and finally to the original monthly aggregation. Drag zoom changes the visible plot and uses Reset zoom. A bar click can change dates or aggregation and uses Back to Previous date.

6. Record a question someone else can reproduce

Record the selected loads, reporting dates, resolution, observed pattern and question it raises. Use the operating schedule and source-data quality to decide what further evidence is required. No fault diagnosis or guaranteed saving follows from this chart alone.

Transcript and references

One day tells a story. Several days help you test whether it repeats. Keep the same three loads selected and open the date picker. Choose a start of the second of November and an end of the tenth. Apply the selection and check that the reporting resolution is Days. The complete days shown here run from the second through the ninth.

Each group of bars now represents a day instead of an hour. The table makes the differences easier to check. In this demo, the fourth of November shows one hundred and ninety-two kilowatt-hours. The bars for the sixth and seventh are much lower, before the eighth rises again.

That is a useful investigation pattern, but the chart does not tell us why it happened. Compare the dates with the building's actual occupancy and operating schedule. Ask whether the lower days match planned shutdowns, whether equipment started when expected, and whether any gaps or estimated values affect the comparison. Do not assume a particular weekend or holiday schedule from the day names alone.

To examine an interesting day, click its bar. Here, clicking the ninth of November opens that day's hourly view. Check the new range and Hours label. Back to Previous date returns to the multi-day comparison. You have moved from spotting a difference to examining when, within that day, the energy was used.

We can take the same approach from a broader view. This example starts with October selected and the resolution set to Months. Click the month's energy bar. In this screen, Expertpower changes the aggregation to Weeks while keeping the month's overall date range. Watch the resolution label as well as the chart.

Now click the weekly bar beginning on the eleventh of October. The range narrows to the eleventh through the eighteenth, and the resolution becomes Days. Click the twelfth of October, and the view narrows again to that complete day, with hourly intervals. Each step gives a more specific question: which week, which day, and then which part of that day?

The Back to Previous date control remembers these steps. Click it to return from the hourly view to the week of daily bars. Click again to return to the month's weekly bars, and once more to the original monthly aggregation. This return path preserves the context of the investigation. The available detail depends on the screen and data, so check the displayed result at every step.

Remember the distinction. Dragging across the plot zooms the visible graph, and Reset zoom restores it. Clicking a bar can change the date period or aggregation, and Back to Previous date reverses that drill-down. They are complementary ways to explore the data.

For a practical review, record the selected loads, the reporting dates, the resolution, the observed pattern and the question it raises. That gives a colleague something they can reproduce. Expertpower provides the visibility; the operating schedule and the quality of the source data help you decide what the pattern means.

References