The ETC II Network Communicator opens a new era for energy management by enabling users to advance from serial network (RS485) and exploit the advantages of the Internet and Intranet.
ETC II DATA CONCENTRATOR / NETWORK COMMUNICATOR
Intelligent Communication Device
The ETC II offers full control of entire power systems, from anywhere, anytime, via an Internet/Ethernet connection and supports various protocols. Its compact design and easy DIN/wall mounting allow for ease of use.
Opens a new era for energy management
Enables users to advance from serial network (RS485) and exploit the advantages of the Internet and Intranet.
Data accumulation from instruments in a background mode
Using Modbus protocol (Modbus master).
Full control of entire power systems
From anywhere, anytime, via an Internet/Ethernet connection
Ease of use
Compact design and easy DIN/wall mounting.
Opens a new era for energy management
Four Main Functions
Transparent
From serial communication to TCP/IP communication, in any of these protocols: Modbus TCP/IP software, DNP TCP/IP and ASCII TCP/IP.
Protocol Converter
For all third-party instruments, such as protection, relay, frequency driver and PLC (from serial communication to TCP/IP communication, in any of these protocols: Modbus TCP/IP software, DNP TCP/IP and ASCII TCP/IP).
Data Server Applications
The ETC II Data Server provides the user with a mechanism that allows data accumulation from instruments in a background mode, using Modbus protocol (Modbus master). The instruments and register range for polling are defined in the polling tables. A total of 64 address ranges can be defined. The data is stored in a buffer, where 120 16-bit registers are reserved for each server address range. Users can specify up to 120 contiguous registers (per address range) in the connected instrument that would be continuously polled and updated in the server register array. Any number of device register ranges can be defined for each instrument.
Web-Based Energy Management Service
See eXpertPower™
Features
Ethernet 10 Base-T port
2 RS422/RS485 ports (Modbus, ASCII, DNP 3.0 protocols)—Master
1 RS232 port—Slave
Modem port (optional)
Provides support for communication protocols (TCP/IP Modbus, TCP/IP ASCII and TCP/IP DNP 3.0)
Serial slave mode (Modbus, ASCII, DNP 3.0 protocols) for the entire range of SATEC products
4 Digital inputs
IRIG-B port
Real Time Clock
Large non-volatile memory
Terminal connection
Telnet service
Field setup
Table top (DIN rail and wall mounting option)
Wide range of power supply options
Compact design
Discuss your metering needs with us
SATEC (Australia) Pty Ltd
We look forward to discussing your next project. Fill out the form or pick up the phone, we will be happy to help.
WE HAVE AN ENERGY METER FOR EVERY APPLICATION
