Through use of the embedded Programmable Logic Controller, Distributed Logic can be achieved enhancing control systems by improving communications bandwidth. Instead of a traditional ‘polling’ structure, the SATEC meters can send messages to BMS or SCADA on event driven applications.

This concept can also lessen the burden on scan-time, improving code efficiency and effectiveness. SATEC’s embedded PLC operates in a single-cycle, giving applications 20ms throughput @ 50HZ. Therefore, improved monitoring of assets is assured.
Demand Response applications are served best by various approaches. First, the meter can send messages to the control system when ‘Demand Thresholds’ have been met, or a triggered parameter is observed by the meter. Another approach is for the meter to perform an operation of a relay, to isolate and operate a respective load such as a pump or fan.

Data communication efficiency is also achieved within the meters. A ‘block transfer’ of 120x communication-registers in a ‘single-scan’ significantly improves control system throughput ability. Traditionally, ‘multiple-scans’ are performed by BMS/SCADA whereby SATEC meters allow for improved communication solutions.

16-Bit Scaled Data is provided to ½ data packet transmission size. However, 32-Bit structured data can also be obtained from the meters, which is more commonly used. The key point is that SATEC meters can provide more effective, efficient and lower bandwidth communication techniques with training and awareness of such features and benefits.

In summary, extensive applications can be achieved using these automation & control philosophies. The true benefit of a smart meter can be understood and achieved. Smarter than your average meter, the SATEC Embedded PLC is the choice for Engineers, Automation and Metering Professionals.

Contact SATEC to discuss your energy management needs.