The EM133-XM is a comprehensive multi-functional, National Measurement Institute (NMI) approved energy meter, which provides a complete range of energy measurement and management. It measures the electrical energy and connects via digital inputs to water, gas or air condition meters. A built in relay output can be freely programmed to remotely disconnect the supply (using external contactors) or raising alarms. The information is displayed locally and is available via communication.
EM133-XM TOU NMI APPROVED SMART ENERGY METER
The First Din-Rail Mounted Multifunction kWh Meter with NMI Approval
The enhanced XM model displays energy, hot and cold water and gas with customised pulse multiplication factors and labels.
Field installable add-on allows adding digital and analog I/Os to facilitate any control scheme (up to 14 digital inputs and 5 relay outputs).
NMI Approved Energy Meter - 0.5S Accuracy
A multi-function din-rail mounted kWh meter suitable for sub-metering for the Australian Market.
3 Phase or 3 Single Phase Configuration
Single phase or 3‑phase power metering, revenue metering and basic power quality information.
Wide range of network configurations
57 to 400V AC, up to 100A direct current measurement, connection of standard CTs (1A, 5A) and a wide range of remote HACS.
Serves any application
From residential energy metering, through industrial energy and harmonic analysis through utility comprehensive substation automation.
A multifunction din-rail mounted, NMI Pattern Approved kWh meter suitable for sub-metering for the Australian Market.
SATEC EM133-XM is a smart DIN rail TOU Energy Meter. It is based on SATEC’s best seller PM130 PLUS with an off‑the-shelf LCD display (similar to the BFM136 display). The EM133-XM NMI approved energy meter provides the full functionality of the PM130EH PLUS combined with 2 Digital Inputs, 1 Digital Output, IR (Infra Red) communication and battery backup for the real time clock. It is fully compatible with all PM130 PLUS modules.
The EM133-XM can serve any application from residential energy metering, through industrial energy and harmonic analysis through utility comprehensive substation automation. It provides multifunctional 3‑phase power metering, revenue metering and basic power quality information. The EM133-XM features an internal real time clock (RTC), battery backup and onboard non-volatile memory for event and data logging. The device includes 16 set points and 4 counters that operate the built in 2 DI/ 1RO or the various analog and digital I/O add-ons.
The EM133-XM NMI approved energy meter offers a wide range of network configurations and versatile voltage and current connections: 57 to 400V AC, up to 100A direct current measurement, connection of standard CTs (1A, 5A) and a wide range of remote HACS – High Quality Current Sensors (split or solid cores).
MULTIFUNCTION 3 PHASE SMART METER
- True RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency
- Ampere/Volt demand meter
- 25, 50, 60 and 400 Hz measurements
- 128 samples per cycle
BILLING TOU ENERGY METER
- Accuracy Class 0.5S
- Four-quadrant active and reactive energy poly-phase static meter
- Three-phase total and per phase energy measurements; active, reactive and apparent energy counters
- Time-of-Use, 4 totalization and tariff energy/demand registers x 8 tariffs, 4 seasons x 4 types of days, 8 tariff changes per day
- One–time easy programmable tariff calendar schedule
- Automatic daily energy and maximum demand profile log for total and tariff registers
HARMONIC ANALYZER
- Voltage and current THD, TDD and K-Factor, up to 40th order harmonic
- Voltage and current harmonic spectrum and angles
REAL TIME WAVE FORM CAPTURE (VIA PC)
- Real-time “scope mode” waveform monitoring capability
- Simultaneous 6-channel 8-cycle waveform capture at a rate of 64 samples per cycle
PROGRAMMABLE LOGICAL CONTROLLER
- Embedded programmable controller
- 16 control set points; programmable thresholds and delays
- Relay output control
- 1-cycle response time
EVENT & DATA RECORDING
- Non-volatile memory for long-term event and data recording for at least 90 days history storage capabilities
- Event recorder for logging internal diagnostic events and setup changes
- Two data recorders; programmable data logs on a periodic basis; automatic daily energy and maximum demand profile log
DISPLAY
- Easy to read 2 x 16 Characters LCD display, adjustable update time
- Auto-scroll option with adjustable page exposition time; auto-return to a default page
REAL TIME CLOCK
- Backup for 260 days
INPUTS/OUTPUTS
- Built-in 2 Digital Inputs and 1 form A solid state digital output
- Optional module 4 Digital Inputs and 2 digital outputs (Solid State or Electro Mechanical)
- Optional module 4 Analog Outputs
COMMUNICATIONS
- Standard 2-wire RS-485 communication port
- Built-in IR communication port
- Optional multipurpose RS-232/422/485 port
- Optional 10/100Base T port
- Optional PROFIBUS port
- Optional RF module (available in certain regions only)
- Optional GPRS modem
COMMUNICATION PROTOCOLS
- Modbus RTU
- Modbus ASCII
- DNP 3.0
- IEC 60870-5-101, -104
METER SECURITY
- 3 levels Password security for protecting meter setups and accumulated data from unauthorised changes
UPGRADEABLE FIRMWARE
- Easy upgrading device firmware through a serial or Ethernet port.
SOFTWARE SUPPORT
- Includes comprehensive Power Analysis Software (PAS) for configuration and data acquisition
- Optional eXpertpower™ client for communicating with the SATEC proprietary eXpertPower™ Internet services
Expansion Modules for EM133-XM NMI Approved Energy Meter
The EM132-133 modular approach enables users to assemble a system that meets their specific needs.
Dimensions (HxWxD):
Small form: 2.8×1.8×1.3″ / 72×46×34 mm
Large form: 3.7×3×1.7″ / 95×77×45 mm
Second Communication port
One of the following:
- Ethernet (TCP/IP)
- WiFi
- 4G CAT-M
- PROFIBUS
- RS232/422/485
Analog Outputs – Small form
4 analog outputs, selection of ranges upon order:
- ±1mA
- 0-20mA
- 0-1mA
- 4-20mA
- 0-3mA
- ±3mA
- 0-5mA
- ±5mA
Digital I/O – Small form
- 4 Digital Inputs (Dry Contact) / 2 Relay Outputs 250V / 5A AC
- 4 Digital Inputs (Dry Contact) / 2 SSR Outputs 250V / 0.1A AC
- 4 Digital Inputs (Dry contact) with RTC battery backup for TOU
Digital I/O – Large form
- 12 Digital Inputs (Dry Contact or 250VDC)
- 4 Relay Outputs 250V/5A AC
- Optional selection of Ethernet, RS-485 or Profibus
Discuss your metering needs with us
SATEC (Australia) Pty Ltd
We look forward to discussing your next project. Fill out the form or pick up the phone, we will be happy to help.
WE HAVE AN ENERGY METER FOR EVERY APPLICATION
SATEC’s device product line serves both energy utilities and energy consumers in various fields. Our application-based product line includes devices spanning from basic power meters up to high performance revenue meters with advanced power quality capabilities.
