+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • About SATEC
  • HARDWARE
    • Phasor Measurement Unit
    • Power Quality Analysers
    • NMI Approved Energy Meters
    • Multi-Channel Energy Meters
    • Current Transformers
    • Expansion Modules
    • All Metering Products
  • SOFTWARE
    • Power Analysis Software (PAS)
    • eXpertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
  • SOLUTIONS
    • Power of Choice Metering
    • NMI Approved Retrofit Energy Metering
    • Frequency Control Ancillary Services (FCAS)
    • Disturbance Direction Detection
    • Phasor Measurement Unit
    • Automatic Demand Response
    • Large-Scale Generation Certificates (LGCs)
  • NEWS
  • DOWNLOADS
    • Manuals & Datasheets
    • Billing & Revenue Metering Catalogue
    • Power Analysis Software (PAS)
    • Current Product Catalogue
  • CONTACT
NextPrevious
Impression network at transformer station in sunset

How to Monitor Power Quality and Ensure IEC 61850 Compliance in the Smart Grid

By SATEC (Australia) Pty Ltd | Featured, Industry News | Comments are Closed | 25 November, 2024 | 2

As modern electrical grids evolve with the increasing integration of renewable energy sources and the complexities of smart grid technologies, the need for precise and comprehensive power quality (PQ) monitoring has never been greater. 

The IEC 61000-4-30 standard, which defines power quality measurement methods, has undergone significant changes between Edition 2 and Edition 3 to meet the growing demands for accurate measurement, time synchronisation and real-time communication.

At SATEC, we have ensured our PM180 power meter meets power quality monitoring requirements for the smart grid and helps facilities to comply with current regulations. 

How the PM180 is adapting to IEC 61000-4-30 Edition 3

The SATEC PM180 is more than just a power meter—it is a comprehensive solution designed for the smart grid. It integrates IEC 61850 functionality, Fast Transient Monitoring, Bay Controller functionality, and Phasor Measurement Unit (PMU) options, making it an all-encompassing device for power quality analysis and substation automation.

1. Fast Transients Monitoring

One of the key changes in IEC 61000-4-30 Edition 3 is the improved methodology for capturing fast transients that are critical for modern grids where fast-switching operations, renewable generation and power electronics contribute to rapid voltage fluctuations. 

Fast transients can be caused by switching actions, lightning strikes and faults, potentially leading to damage to sensitive equipment or disruptions in grid stability.

The PM180’s Fast Transient Monitoring:

  • Offers powerful capabilities, enabling it to capture and analyse fast voltage events with high precision. This feature is essential in grids with high penetration of renewable energy sources, which are prone to sudden voltage variations and transients.
  • By integrating Fast Transient Monitoring into the PM180, utilities can gain real-time visibility into transient events, enabling quick responses and mitigations to maintain grid stability. The ability to detect and classify these events in line with IEC 61000-4-30 Edition 3 makes the PM180 a future-proof solution for power quality monitoring in dynamic grid environments.

2. Bay Controller Functionality

In addition to its power quality monitoring capabilities, the SATEC PM180 includes Bay Controller functionality as part of its advanced substation automation solutions. As grid infrastructure becomes more automated, the ability to control and monitor switchgear, circuit breakers, and isolators is essential for maintaining operational efficiency and ensuring quick responses to faults.

Bay Controller Features in the PM180:

  • The PM180 provides advanced control over circuit breakers and switches in substations, allowing it to act as a Bay Controller within the substation automation system.
  • Its support for IEC 61850 GOOSE messaging enables fast and reliable communication between devices, ensuring real-time control and monitoring. With this functionality, the PM180 is well-suited for modern substations that demand high-speed decision-making and automation for grid reliability.
  • Interlocking logic and remote/local control provide secure and automated operations for critical switchgear. This integration of bay control capabilities with power quality monitoring makes the PM180 a valuable asset in both protection and automation systems.
PM180 High Performance Power Quality Analyser

3. Phasor Measurement Unit (PMU) Options

The integration of Phasor Measurement Units (PMUs) into substations and smart grids is becoming increasingly important for real-time monitoring of power system stability. PMUs provide synchronised measurements of voltage and current phasors across the grid, which is essential for monitoring the dynamic behaviour of the system, particularly in grids with significant renewable generation.

PM180 PMU Capabilities:

  • The PM180 offers multi-functionality, allowing it to measure synchronised phasors in real-time. This is particularly useful for wide-area monitoring and grid stability analysis, where the ability to track and analyse phasor data can help prevent system disturbances or blackouts.
  • By integrating PMU data with its comprehensive power quality monitoring capabilities, the PM180 provides utilities with an end-to-end solution for real-time monitoring, fault detection, and stability management.
  • PMU data can be seamlessly integrated with other IEC 61850 devices in the substation, ensuring that real-time phasor data is accessible and usable for both local and remote control systems.

4. IEC 61850 Integration for the Smart Grid

As utilities modernise their infrastructure to accommodate distributed generation, digital substations, and smart grids, IEC 61850 has become the de facto communication protocol for substations. 

Edition 3 of IEC 61000-4-30 emphasises the importance of synchronised event logging, advanced reporting, and real-time communication, all of which are made possible through IEC 61850.

IEC 61850 Functionality in the PM180:

  • The PM180’s robust IEC 61850 compliance allows it to seamlessly integrate into substation automation systems, providing real-time data exchange, control, and monitoring.
  • With GOOSE messaging, the PM180 can exchange critical power quality and control data with other Intelligent Electronic Devices (IEDs) in real-time. This real-time communication is crucial for automating grid responses to power quality events and ensuring efficient grid management.
  • The PM180’s compliance with both Class A and Class S measurement requirements ensures that all PQ data is accurate, consistent, and reliable—ideal for critical monitoring in high-demand applications.

Why the SATEC PM180 is the Ideal Smart Grid Solution

The SATEC PM180 is not just a power meter—it is a complete smart grid solution. 

This device’s combination of Fast Transient Monitoring, Bay Controller functionality, PMU options, and IEC 61850 integration positions it as an ideal device for utilities that are modernising their grid infrastructure. 

Whether managing voltage dips, swells, flicker, or harmonics as outlined in IEC 61000-4-30 Edition 3, or implementing real-time communication and control as required by IEC 61850, the PM180 meets and exceeds the demands of modern power systems.

SATEC PM180: The All-Around Smart Meter for the Future Grid

The SATEC PM180 provides a comprehensive, versatile solution for utilities and industries looking to future-proof their power quality monitoring and substation automation capabilities. Its powerful combination of Fast Transient Monitoring, Bay Controller functionality, and PMU options make it an indispensable tool in the ongoing evolution of the smart grid. 

Fully compliant with both IEC 61000-4-30 and IEC 61850, the PM180 delivers the accuracy, reliability, and real-time performance needed to maintain grid stability and efficiency in today’s rapidly changing energy landscape.

By integrating the PM180 into their systems, your utility can be future-ready—whether this means handling the challenges posed by renewable energy, ensuring real-time control over critical infrastructure, or achieving unparalleled power quality analysis.

SATEC is the trusted name in energy management solutions. Contact our team for more information about Bay Controllers and other products. 

power quality, power quality metering, substation monitoring

NextPrevious

INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

NEWS

  • The Evolution of Smart Metering Standards: What’s Next for Compliance and Innovation?
  • High Precision Metering for NABERS & J9 Compliance
  • Class A vs. Class S Power Quality Meters: Advanced Monitoring for Critical Infrastructure
  • Energy Monitoring for Offshore Wind Projects: Lessons for Australia’s Future
  • Australia’s Renewable Energy Target (RET) – What Role Does Metering Play?

POPULAR POSTS

  • Industry requires smart metering standards to continually evolve.

    The Evolution of Smart Metering Standards: What’s Next for Compliance and Innovation?

    By SATEC (Australia) Pty Ltd | Comments are Closed

    Smart metering has revolutionised the way energy is measured, managed and consumed. With its ability to provide real-time data on energy usage, smart metering plays a vital role in modernising energy grids and improving the efficiency of energy markets. However, as this technology continues to evolve, so too must the standards that govern it.

  • Sustainable building with vertical gardens

    High Precision Metering for NABERS & J9 Compliance

    By SATEC (Australia) Pty Ltd | Comments are Closed

    Achieving superior energy efficiency in buildings is not just about measurement—it’s about measurement accuracy. In Australia, compliance with NABERS (National Australian Built Environment Rating System) and J9 standards under the National Construction Code (NCC) 2022 demands reliable energy data.

  • Data Centre

    Class A vs. Class S Power Quality Meters: Advanced Monitoring for Critical Infrastructure

    By SATEC (Australia) Pty Ltd | Comments are Closed

    Power quality monitoring is a fundamental requirement for ensuring the stability, efficiency and reliability of modern electrical networks, especially in critical infrastructure applications.

  • Offshore wind turbines

    Energy Monitoring for Offshore Wind Projects: Lessons for Australia’s Future

    By SATEC (Australia) Pty Ltd | Comments are Closed

    Offshore wind projects are set to play a crucial role in Australia’s renewable energy transition. While the sector is still in its early stages, insights from established international projects offer valuable guidance.

  • Solar and wind farm for renewable energy

    Australia’s Renewable Energy Target (RET) – What Role Does Metering Play?

    By SATEC (Australia) Pty Ltd | Comments are Closed

    Australia’s Renewable Energy Target (RET) is a key policy driving the transition to a cleaner, greener energy system. By incentivising renewable energy generation, the RET has played a pivotal role in reducing emissions and increasing the share of renewables in Australia’s energy mix.

SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Terms & Conditions
  • Privacy Policy

Recent Posts

  • Industry requires smart metering standards to continually evolve.

    The Evolution of Smart Metering Standards: What’s Next for Compliance and Innovation?

    Smart metering has revolutionised the way energy is measured, managed and consumed. With its ability to provide real-time data on energy usage, smart metering plays a vital role in modernising energy grids and improving the efficiency of energy markets. However, as this technology continues to evolve, so too must the standards that govern it.

    11 March, 2025
  • Sustainable building with vertical gardens

    High Precision Metering for NABERS & J9 Compliance

    Achieving superior energy efficiency in buildings is not just about measurement—it’s about measurement accuracy. In Australia, compliance with NABERS (National Australian Built Environment Rating System) and J9 standards under the National Construction Code (NCC) 2022 demands reliable energy data.

    27 February, 2025
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • About SATEC
  • HARDWARE
    • Phasor Measurement Unit
    • Power Quality Analysers
    • NMI Approved Energy Meters
    • Multi-Channel Energy Meters
    • Current Transformers
    • Expansion Modules
    • All Metering Products
  • SOFTWARE
    • Power Analysis Software (PAS)
    • eXpertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
  • SOLUTIONS
    • Power of Choice Metering
    • NMI Approved Retrofit Energy Metering
    • Frequency Control Ancillary Services (FCAS)
    • Disturbance Direction Detection
    • Phasor Measurement Unit
    • Automatic Demand Response
    • Large-Scale Generation Certificates (LGCs)
  • NEWS
  • DOWNLOADS
    • Manuals & Datasheets
    • Billing & Revenue Metering Catalogue
    • Power Analysis Software (PAS)
    • Current Product Catalogue
  • CONTACT
SATEC (Australia) Pty Ltd