+61 2 4774-2959
[email protected]
  • About SATEC
  • Billing & Revenue Metering Catalogue
SATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty LtdSATEC (Australia) Pty Ltd
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT

Blog

Manufacturing & Heavy Industry energy metering and power quality solutions from SATEC Australia tailored architectures, standards compliance and case studies.

The EM133-XM Is Not Just A Meter It Is The Starting Point For Smarter Energy Decisions

The EM133-XM Is Not Just A Meter: It Is The Starting Point For Smarter Energy Decisions

By SATEC (Australia) Pty Ltd | Alarming & Notifications, Apartment Blocks, Commercial & Mixed-Use, Communications, Councils & Public Facilities, Data Centres, DIN Rail Meters, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, NABERS & NCC J9, NMI Pattern Approval & NITP-14, Ports & Marine, Products & Hardware, Renewables & Storage, Residential Use, Smart Energy Meters, Solar PV, Sub-Metering & Billing, Water & Wastewater, Wind Generation | 0 comment | 14 July, 2026 | 0

Discover how the NMI approved SATEC EM133-XM turns accurate meter data into smarter energy decisions, clearer billing and better reporting.

Your Meter, Your Data, Your Platform Why Energy Hardware Should Work With Third-Party Software

Your Meter, Your Data, Your Platform: Why Energy Metering Should Work With Third-Party Software

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Communications, Councils & Public Facilities, Device Management & Firmware, Education & Campuses, eXpertPower SaaS, Featured, Future-Proofing & Upgrades, Integrations & API, Manufacturing & Heavy Industry, Meter Data Management (MDM), Mixed Use Facilities, Rail Infrastructure, Renewables & Storage, Smart Energy Meters, Software & Cloud, Transport & Infrastructure, Water & Wastewater | 0 comment | 8 July, 2026 | 0

Learn why metering with third-party software gives businesses more control, better integration and greater flexibility across energy management systems.

Electric Truck Charging Why Depot Metering Is The Key To Managing New Power Demand

Electric Truck Charging: Why Depot Metering Is The Key To Managing New Power Demand

By SATEC (Australia) Pty Ltd | Commercial & Mixed-Use, Councils & Public Facilities, Demand Management & Load Shedding, Education & Campuses, Energy Analytics & Reporting, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Industries, Manufacturing & Heavy Industry, Smart Energy Meters, Transport & Infrastructure, Uncategorized | 0 comment | 6 July, 2026 | 0

Charging for electric trucks is reshaping depot energy demand. Learn why power capacity, metering and energy visibility matter as fleets electrify.

Type 8 Energy Meters Explained: What Secondary Settlement Points Mean For Large Energy Users

By SATEC (Australia) Pty Ltd | Airports, Education & Campuses, Embedded Networks, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Rail Infrastructure, Smart Energy Meters, Sub-Metering & Billing, Tariffs & Costs | 0 comment | 1 July, 2026 | 0

Type 8 energy meters explained for large energy users. Learn how secondary settlement points support flexible trading behind a premises.

The Role Of Power Quality In An Industrial Energy Monitoring System

By SATEC (Australia) Pty Ltd | Energy Analytics & Reporting, Featured, Future-Proofing & Upgrades, Harmonics & Flicker, Manufacturing & Heavy Industry, Mining & Resources, Power Quality, Power Quality Analysers, Smart Energy Meters | Comments are Closed | 18 June, 2026 | 0

Learn how power quality strengthens an industrial energy monitoring system and how SATEC meters support accurate energy visibility.

Energy Bills Reduction with Time-of-Use Tariffs How to Shift Load and Save

Energy Bills Reduction with Time-of-Use Tariffs: How to Shift Load and Save

By SATEC (Australia) Pty Ltd | Apartment Blocks, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Demand Management & Load Shedding, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, eXpertPower SaaS, Featured, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mixed Use Facilities, Ports & Marine, Smart Energy Meters, Sub-Metering & Billing, Tariffs & Costs | Comments are Closed | 17 June, 2026 | 0

Energy bills reduction starts with smarter timing. Learn how time-of-use tariffs work and how Expertpower with SATEC meters helps businesses shift load and save.

What Is Frequency Control Ancillary Services (FCAS)

What Is Frequency Control Ancillary Services (FCAS)?

By SATEC (Australia) Pty Ltd | AEMO MASS & FCAS, Energy Analytics & Reporting, FCAS Compliance & MASS, Featured, Frequency Control Ancillary Service (FCAS), Future-Proofing & Upgrades, Knowledge Centre, Manufacturing & Heavy Industry, Renewables & Storage, Smart Energy Meters, Solar PV, Standards & Compliance, Utilities & Transmission, Wind Generation | Comments are Closed | 15 June, 2026 | 0

Learn what Frequency Control Ancillary Services are, why FCAS matters for grid stability and how SATEC metering supports accurate energy monitoring.

Urban Renewable Energy Zones (UREZs)

What Are Urban Renewable Energy Zones (UREZs)?

By SATEC (Australia) Pty Ltd | Battery Storage & BESS, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Distribution Networks, Education & Campuses, Energy Analytics & Reporting, Energy Efficiency & NABERS, EV Charging & V2G, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, NABERS & NCC J9, Ports & Marine, Renewables & Storage, Smart Energy Meters, Solar PV, Wind Generation | Comments are Closed | 12 June, 2026 | 0

Learn what UREZs are, why Urban Renewable Energy Zones matter for cities and how smart metering helps make local renewable energy visible and manageable.

What FCAS Reform Means For Embedded Networks, Large Loads And Behind-The-Meter Assets

What FCAS Reform Means For Embedded Networks, Large Loads And Behind-The-Meter Assets

By SATEC (Australia) Pty Ltd | AEMO MASS & FCAS, Demand Management & Load Shedding, Embedded Networks, Energy Analytics & Reporting, FCAS Compliance & MASS, Featured, Frequency Control Ancillary Service (FCAS), IEC 61000-4-30 Class A, Manufacturing & Heavy Industry, Microgrids & Embedded Networks, Mixed Use Facilities, Smart Energy Meters, Standards & Compliance | Comments are Closed | 10 June, 2026 | 0

Understand what FCAS reform means for embedded networks, large loads and behind the meter assets plus how SATEC metering supports smarter energy decisions.

How To Find Phantom Loads Using Smart Metering Data

How To Find Phantom Loads Using Smart Metering Data

By SATEC (Australia) Pty Ltd | Agriculture, Airports, Aquaculture, Commercial & Mixed-Use, Councils & Public Facilities, Data Centres, Education & Campuses, Embedded Networks, Energy Analytics & Reporting, Energy Efficiency & NABERS, Featured, Future-Proofing & Upgrades, Hospitals & Healthcare, Industries, Manufacturing & Heavy Industry, Marinas, Microgrids & Embedded Networks, Mining & Resources, Ports & Marine, Rail Infrastructure, Smart Energy Meters, Sub-Metering & Billing, Telecommunications, Transport & Infrastructure, Water & Wastewater | Comments are Closed | 8 June, 2026 | 0

Learn how to find phantom loads using smart metering data and reduce hidden energy waste across commercial buildings and facilities.

1234

BOOK AN ONLINE MEETING


INDUSTRY NEWS & VIEWS

Get fortnightly updates delivered straight to your inbox.

Energy Management Knowledge Base

NEWS

  • MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants
  • Triplen Harmonics Explained: How Harmonic Spectra Reveal Neutral Conductor Overloading
  • Single Phasing In Three Phase Motors: Causes, Symptoms, Damage And Protection
  • Commercial Solar Metering: What The 1 MW SRES Change Means
  • Wind Farm Power Quality: Harmonics, Voltage and Grid Stability in Australian Networks
SATEC Australia logo

SATEC – Solutions And Technology for Energy Control

SATEC’s presence in Australia brings together 40 plus years of experience and knowledge for Energy Management Solutions.

The culmination of local expertise and SATEC’s Global leadership in metering, power quality analysers and software provides a source of knowledge to satisfy customer’s ever changing demands for today’s Energy and Power Quality Applications.

Quick Find

  • Contact
  • Metering Products
  • Energy Management Software
  • News – Events – Updates
  • Downloads
  • Billing & Revenue Metering Catalogue
  • Current Product Catalogue
  • Energy Management Knowledge Base
  • Terms & Conditions
  • Privacy Policy
  • Privacy Policy – eXpertConnect

Recent Posts

  • MID Approved Meters In Australia Why They Cannot Legally Bill Tenants

    MID Approved Energy Meters In Australia: Why They Cannot Legally Bill Tenants

    MID approved energy meters Australia: Why European certification cannot legally bill tenants here, what NMI pattern approval requires and how to check any meter.

    17 August, 2026
  • Triplen Harmonics Explained How Harmonic Spectra Reveal Neutral Conductor Overloading

    Triplen Harmonics Explained: How Harmonic Spectra Reveal Neutral Conductor Overloading

    Triplen harmonics add in the neutral instead of cancelling. Learn how harmonic spectra reveal neutral conductor overloading in Australian installations.

    14 August, 2026
© 2025 SATEC (Australia) Pty Ltd. | ABN 21-142640417 | SATEC® All Rights Reserved
  • HARDWARE
    • All Metering Products
    • Current Transformers
    • DC Energy Metering
    • Expansion Modules
    • Frequency Control Ancillary Services – FCAS
    • Multi-Channel Energy Meters
    • NMI Approved Energy Meters
    • Phasor Measurement Unit
    • Power Quality Analysers
  • SOFTWARE
    • Expertpower SaaS – EMS, Billing, Power Quality
    • Meter Data Management (MDM)
    • Power Analysis Software (PAS)
  • SOLUTIONS
    • Automatic Demand Response
    • Disturbance Direction Detection
    • Frequency Control Ancillary Services (FCAS)
    • Large-Scale Generation Certificates (LGCs)
    • NMI Approved Retrofit Energy Metering
    • Phasor Measurement Unit
    • Power of Choice Metering
    • Time of Use (TOU) Control
  • NEWS
  • RESOURCES
  • CONTACT
SATEC (Australia) Pty Ltd