PM175 PRO CLASS A POWER QUALITY ANALYSER WITH EN 50160 REPORTING

The PM175 PRO combines Class A Ed. 3.1 power quality analysis, Class 0.2S energy metering and advanced waveform recording in one panel-mounted instrument.

The SATEC PM175 PRO is designed for demanding substation, industrial and commercial applications where accurate power quality data is critical. It provides Class A Ed. 3.1 measurement performance in accordance with IEC 61000-4-30 along with EN 50160 compliance statistics and event reporting.

Eight fast waveform recorders capture seven channels simultaneously with selectable sampling rates up to 256 samples per cycle and 20 pre-fault cycles to help users investigate disturbances and identify their cause.

With dual-port Ethernet, IEC 61850 Ed. 2 support and 1 µs time synchronisation via IRIG-B or PTP v2, the PM175 PRO integrates easily with SCADA and substation automation systems.

Its 16GB memory supports long-term waveform and data recording while Class 0.2S four-quadrant energy metering, harmonic analysis to the 63rd order and leakage current detection provide a comprehensive view of electrical system performance.

Manuals & Data Sheets

Class A Ed. 3.1 Power Quality Analysis

Measures power quality in accordance with IEC 61000-4-30 and provides EN 50160 compliance statistics, event logs and programmable event triggering.

Advanced Waveform and Event Recording

Eight fast waveform recorders capture seven channels simultaneously at up to 256 samples per cycle with 20 pre-fault cycles retained for disturbance analysis.

Class 0.2S Energy and Demand Metering

Provides accurate four-quadrant active and reactive energy metering along with Time-of-Use, block and sliding demand measurement.

Designed for Substation and Industrial Integration

Dual-port Ethernet, IEC 61850 Ed. 2 and 1 µs time synchronisation support integration with SCADA, automation and synchronised monitoring systems.

PM175 PRO CLASS A POWER QUALITY ANALYSER WITH EN 50160 REPORTING

A panel-mounted Class A power quality analyser combining advanced disturbance recording, accurate energy metering and substation communications.

The PM175 PRO is a multifunction power quality analyser designed for substations, industrial facilities, renewable energy systems and commercial energy management applications. It delivers Class A Ed. 3.1 power quality measurement in accordance with IEC 61000-4-30 and provides EN 50160 compliance statistics, event logs and programmable power quality triggering.

Eight fast waveform recorders capture seven channels simultaneously at up to 256 samples per cycle. Each recording can retain 20 pre-fault cycles to provide valuable context when investigating voltage disturbances, equipment operation and other electrical events. A further 16 programmable data recorders and 16GB of onboard memory support long-term monitoring and analysis.

The PM175 PRO also provides Class 0.2S four-quadrant energy metering, harmonic analysis to the 63rd order and embedded control functionality. Dual-port Ethernet, RS-485, USB Type-C and support for IEC 61850 Ed. 2 allow the meter to integrate with SCADA, automation and energy management systems.

PM175 PRO Functions

CLASS A POWER QUALITY ANALYSER

Class A Ed. 3.1 measurement methods according to IEC 61000-4-30
EN 50160 compliance statistics and event reporting
Programmable power quality limits and event triggering
Flicker measurement according to IEC 61000-4-15
Tested according to IEC 62586-1 and IEC 62586-2

WAVEFORM RECORDING

Eight fast waveform recorders
Seven-channel simultaneous recording of V1–V3 and I1–I4
Selectable sampling rates of 32, 64, 128 or 256 samples per cycle
Retains 20 pre-fault cycles before each trigger
Synchronised waveform capture across multiple devices
COMTRADE and PQDIF export through PAS software

HARMONIC ANALYSER

Voltage and current harmonics to the 63rd order
THD for voltage and current
Current TDD and K-factor
Voltage and current interharmonics
Directional power harmonics and harmonic power factor
IEEE 519 harmonic analysis
Phasor diagrams and symmetrical components

EVENT AND DATA RECORDING

16 programmable data recorders
Periodic recording or triggering from internal and external events
Event recorder for diagnostics, control events and I/O operations
32 digital counters for external pulses and internal events
16 programmable timers ranging from half a cycle to 24 hours
16GB memory for long-term waveform and data recording

ENERGY AND DEMAND METERING

Class 0.2S four-quadrant active and reactive energy metering
Compliant with AS/IEC 62053-22
Time-of-Use energy and demand registers
16 summary totalisation registers
Block and sliding demand measurement
Supports up to 64 energy sources
Accumulates energy pulses from external meters

EMBEDDED PROGRAMMABLE CONTROLLER

64 programmable control setpoints
OR/AND logic and extensive triggering options
Programmable thresholds and delays
Relay control and event-driven recording
Cross-triggering between multiple devices over Ethernet
Synchronous event capture across up to 16 triggering channels

AC MEASUREMENT INPUTS

Four fully isolated voltage inputs
Operating range of 10 to 1,000V AC line-to-line at 50 or 60 Hz
Fourth voltage input for reference voltage measurement
Four isolated current inputs
1A, 5A, HACS, LPCT-D and RS5 current input options
Fourth current input enables neutral, residual and leakage current detection

INPUTS AND OUTPUTS

Two optically isolated digital inputs
One solid-state relay output
One configurable universal analogue input
Optional built-in digital input, relay output and analogue output modules
Programmable alarm notifications and remote relay control

COMMUNICATIONS

Two 10/100 Base-T Ethernet ports
Optically isolated RS-485 serial port
USB 2.0 Type-C port
Up to 10 simultaneous connections per Ethernet port
TCP notification client for event-based or scheduled reporting

COMMUNICATION PROTOCOLS

Modbus RTU and Modbus TCP
DNP3.0 and DNP3.0/TCP
IEC 60870-5-101 and IEC 60870-5-104
IEC 61850 Ed. 2
PTP v2 according to IEEE 1588

TIME SYNCHRONISATION

Time synchronisation accuracy down to 1 µs
IRIG-B GPS time synchronisation
PTP v2 according to IEEE 1588
SNTP time synchronisation
1 pulse-per-second synchronisation through a digital input
Battery-backed internal real-time clock

DISPLAY AND MEMORY

Bright three-row, seven-segment LED display
Two four-character rows and one six-character row
16GB onboard memory
Three-year battery retention for the internal clock
Display-free transducer version also available

INSTALLATION

Compatible with a four-inch round panel cutout
Compatible with a 92 × 92 mm square panel cutout
Dimensions of 114 × 127 × 127 mm
Weight of 1.23 kg
IP51 degree of protection

OPERATING CONDITIONS

Meter operating temperature from −40°C to +70°C
Display operating temperature from −20°C to +70°C
Storage temperature from −40°C to +85°C
Suitable for humidity levels from 0 to 95% RH, non-condensing

Discuss your metering needs with us

SATEC (Australia) Pty Ltd

We look forward to discussing your next project. Fill out the form or pick up the phone, we will be happy to help.

PO Box 82, Mulgoa NSW 2745

Phone: +61 2 4774-2959

Email: [email protected]

WE HAVE AN ENERGY METER FOR EVERY APPLICATION

SATEC’s device product line serves both energy utilities and energy consumers in various fields. Our application-based product line includes devices spanning from basic power meters up to high performance revenue meters with advanced power quality capabilities.

DOWNLOAD CATALOGUE DISCUSS WITH US