1 00:00:08,000 --> 00:00:10,150 For the matching 15 pin display connection, 2 00:00:10,280 --> 00:00:13,180 the manual identifies pin 1 as positive 12 volts, 3 00:00:13,560 --> 00:00:15,400 pin 5 as communications plus, 4 00:00:15,900 --> 00:00:17,700 pin 7 as communications minus, 5 00:00:18,080 --> 00:00:19,680 and pin 8 as the supply return. 6 00:00:20,140 --> 00:00:21,680 Pin 15 is chassis ground, 7 00:00:21,960 --> 00:00:24,080 follow the numbered connectors and the complete manufacturer 8 00:00:24,080 --> 00:00:27,480 drawing. Do not infer the connector viewing direction. 9 00:00:27,990 --> 00:00:29,540 For this documented connection, 10 00:00:29,790 --> 00:00:32,670 a cable up to three metres can carry display power from 11 00:00:32,670 --> 00:00:35,950 the meter. Longer connections use the separate 12-volt 12 00:00:35,950 --> 00:00:39,730 supply arrangement with a minimum capacity of 350 milliamps. 13 00:00:40,170 --> 00:00:42,490 The supply feeds display pins one and eight. 14 00:00:42,970 --> 00:00:45,310 meter pin one is not connected in that arrangement. 15 00:00:45,310 --> 00:00:46,960 Do not parallel the two supplies.