1 00:00:00,000 --> 00:00:02,540 Before trusting meter timestamps, check the clock. 2 00:00:03,220 --> 00:00:06,100 In PAS, Open Monitor, then RTC. 3 00:00:07,020 --> 00:00:08,560 Compare the device time with the computer. 4 00:00:09,360 --> 00:00:10,520 Set synchronises the meter. 5 00:00:11,300 --> 00:00:12,720 Complete authentication if asked. 6 00:00:13,620 --> 00:00:15,220 Then select Read again and compare. 7 00:00:16,040 --> 00:00:17,840 These are separate before and after shots 8 00:00:17,840 --> 00:00:20,440 from our EM133-XM session. 9 00:00:21,220 --> 00:00:23,000 Pro tip, upload the event log, 10 00:00:23,180 --> 00:00:24,760 and check for the RTC set event. 11 00:00:25,660 --> 00:00:27,460 Here, the saved database confirmed it. 12 00:00:27,460 --> 00:00:30,740 PAS report navigation needs further investigation.