WEBVTT

00:00:00.000 --> 00:00:04.020
What changed, where did it change, and which loads deserve a closer

00:00:04.020 --> 00:00:05.560
look?

00:00:05.560 --> 00:00:10.960
In Expertpower twenty six point zero four point zero, the new Period

00:00:10.960 --> 00:00:15.400
Comparison dashboard brings those questions together.

00:00:15.400 --> 00:00:20.620
Let's explore it using the demonstration account, without changing any records.

00:00:20.620 --> 00:00:24.900
Under Energy Efficiency, open Period Comparison.

00:00:24.900 --> 00:00:30.240
The left filters let you choose the scope: branches, regions, chain formats

00:00:30.240 --> 00:00:32.660
and branch sizes.

00:00:32.660 --> 00:00:36.480
That helps you ask a focused question, rather than treating every building

00:00:36.480 --> 00:00:38.840
as the same operation.

00:00:38.840 --> 00:00:41.720
Notice the calendar years across the top.

00:00:41.720 --> 00:00:45.900
On this page, they replace the usual date picker.

00:00:45.900 --> 00:00:49.600
We begin with twenty twenty six and twenty twenty five.

00:00:49.600 --> 00:00:54.420
Always read the months under each chart: this example compares January to

00:00:54.420 --> 00:00:57.040
October, rather than two complete years.

00:00:57.040 --> 00:01:02.380
Before following the coloured results, check Data Coverage.

00:01:02.380 --> 00:01:07.680
The coverage percentage and the included branch count are separate indicators.

00:01:07.680 --> 00:01:09.640
They are not interchangeable.

00:01:09.640 --> 00:01:13.700
Incomplete coverage is a reason to investigate the data before drawing a

00:01:13.700 --> 00:01:14.060
conclusion.

00:01:15.233 --> 00:01:17.593
Here is a useful distinction.

00:01:17.593 --> 00:01:21.833
Consumption answers how much energy the selected operation used.

00:01:21.833 --> 00:01:27.013
Normalized by Area changes the question to energy per square metre.

00:01:27.013 --> 00:01:30.813
In this demo, the overall year on year result changes from an

00:01:30.813 --> 00:01:36.293
increase in total consumption to a decrease on the area-normalised metric.

00:01:36.293 --> 00:01:39.533
That is a good reminder to check the denominator before calling a

00:01:39.533 --> 00:01:42.293
result better or worse.

00:01:42.293 --> 00:01:46.733
Valid area information and comparable operations still matter;

00:01:46.733 --> 00:01:50.873
this switch alone does not prove improved efficiency.

00:01:50.873 --> 00:01:55.233
Returning to Consumption, the unit control lets you choose automatic scaling,

00:01:55.233 --> 00:01:59.153
or kilo, mega and giga units.

00:01:59.153 --> 00:02:02.653
Read the axis after changing it, so a larger unit is not

00:02:02.653 --> 00:02:05.313
mistaken for lower consumption.

00:02:05.313 --> 00:02:15.073
The category selector also lets us focus on a particular use.

00:02:15.073 --> 00:02:20.393
Here, HVAC is selected on its own. We can examine heating, ventilation and air conditioning separately, then return

00:02:20.393 --> 00:02:23.933
to all categories for the wider picture.

00:02:23.933 --> 00:02:27.653
The useful outcome is a better question for the building team, not

00:02:27.653 --> 00:02:28.753
an automatic diagnosis.

00:02:30.033 --> 00:02:35.433
Category Breakdown shows the mix of energy uses in each selected year.

00:02:35.433 --> 00:02:39.213
Percentage mode answers how that mix is divided.

00:02:39.213 --> 00:02:44.313
Switching to energy units answers how much each category actually used.

00:02:44.313 --> 00:02:48.033
A smaller share does not necessarily mean less energy.

00:02:48.033 --> 00:02:52.373
Choose View all to inspect the underlying category table.

00:02:52.373 --> 00:02:56.033
In our demo, the table retains the selected years and the January

00:02:56.033 --> 00:03:01.273
to October period, and shows category values and percentage shares.

00:03:01.273 --> 00:03:04.593
Read it alongside the chart’s unit before using the result in a

00:03:04.593 --> 00:03:05.913
report.

00:03:05.913 --> 00:03:10.453
Back in the charts, Change Contribution bridges the earlier total to the

00:03:10.453 --> 00:03:11.973
later total.

00:03:11.973 --> 00:03:16.513
The steps show which categories added energy and which reduced it.

00:03:16.513 --> 00:03:22.133
In this demonstration, HVAC is a prominent positive contribution.

00:03:22.133 --> 00:03:26.353
That gives us a place to begin checking operating hours, loads and

00:03:26.353 --> 00:03:26.873
data quality.

00:03:26.873 --> 00:03:32.613
It does not establish the cause, or calculate a financial saving.

00:03:32.613 --> 00:03:37.153
Think of these two panels as complementary: one explains the composition of

00:03:37.153 --> 00:03:40.413
the total, and the other explains the movement between totals.

00:03:41.533 --> 00:03:44.093
Monthly Consumption adds the timing.

00:03:44.093 --> 00:03:46.773
Periodic shows each month separately.

00:03:46.773 --> 00:03:51.133
Accumulative shows a running total from January, making it easier to follow

00:03:51.133 --> 00:03:53.893
how the gap builds through the year.

00:03:53.893 --> 00:03:56.893
Read Not Compared carefully.

00:03:56.893 --> 00:04:00.533
The shaded future months here are outside the comparison;

00:04:00.533 --> 00:04:04.033
they are not measured zeros and do not, by themselves, indicate a

00:04:04.033 --> 00:04:05.873
failed meter.

00:04:05.873 --> 00:04:10.813
Monthly Change by Category takes the investigation another step.

00:04:10.813 --> 00:04:14.953
Energy-unit bars show the contributions to each month's change, with a total

00:04:14.953 --> 00:04:16.393
trend.

00:04:16.393 --> 00:04:19.673
Percentage mode shows relative changes.

00:04:19.673 --> 00:04:23.413
Keep the year pair, sign and unit in view when reading either

00:04:23.413 --> 00:04:25.273
presentation.

00:04:25.273 --> 00:04:30.553
Select a third calendar year and the dashboard can show adjacent comparisons:

00:04:30.553 --> 00:04:34.893
twenty twenty five against twenty twenty four, and twenty twenty six against

00:04:34.893 --> 00:04:36.653
twenty twenty five.

00:04:36.653 --> 00:04:41.133
The periods may differ between those pairs, so read each chart's own

00:04:41.133 --> 00:04:42.533
label.

00:04:42.533 --> 00:04:46.213
This helps distinguish an unusual month from a pattern that deserves a

00:04:46.213 --> 00:04:46.813
longer look.

00:04:47.700 --> 00:04:52.340
The release also introduces an AI companion in Energy Efficiency.

00:04:52.340 --> 00:04:54.520
Here is the actual panel.

00:04:54.520 --> 00:04:58.840
The supplied notes describe help with features and data analysis.

00:04:58.840 --> 00:05:03.140
We are only viewing the panel in this read-only demonstration, rather than

00:05:03.140 --> 00:05:07.420
submitting a question or presenting an unverified answer.

00:05:07.420 --> 00:05:10.460
There are administrative additions too.

00:05:10.460 --> 00:05:13.880
The release notes describe a Device Summary at the bottom of License

00:05:13.880 --> 00:05:19.280
Management, and customer-specific licence-expiry reminders.

00:05:19.280 --> 00:05:21.900
These are documented capabilities;

00:05:21.900 --> 00:05:26.400
we have not configured licences or sent any reminders here.

00:05:26.400 --> 00:05:30.940
For your next review, choose a meaningful scope, confirm the comparison period

00:05:30.940 --> 00:05:36.100
and coverage, then compare total energy with the area-normalised view where

00:05:36.100 --> 00:05:38.060
appropriate.

00:05:38.060 --> 00:05:43.500
Use the category and monthly panels to decide what to investigate next.

00:05:43.500 --> 00:05:47.600
That is the value of the new dashboard: a clearer route from

00:05:47.600 --> 00:05:52.300
an overall change to a focused operational question.

00:05:52.300 --> 00:05:57.620
Explore the other Expertpower University lessons for the everyday date picker,

00:05:57.620 --> 00:05:59.920
multiple-load monitoring and graph navigation.
