WEBVTT

00:00:00.000 --> 00:00:04.320
If you regularly review the same set of
loads, a saved group can save you from

00:00:04.320 --> 00:00:07.440
rebuilding that selection each time.

00:00:07.440 --> 00:00:11.160
In this lesson, we will create two temporary
groups for a small commercial

00:00:11.160 --> 00:00:15.820
building, use them in Last Reading and
Consumption, then remove both saved

00:00:15.820 --> 00:00:17.160
groups.

00:00:17.160 --> 00:00:19.420
The existing device names stay as they are.

00:00:20.360 --> 00:00:22.480
We start by opening My Groups.

00:00:22.480 --> 00:00:24.460
Its list is empty in this demonstration.

00:00:32.400 --> 00:00:37.100
With Main air conditioning selected, click
Rooms air conditioning as well.

00:00:37.100 --> 00:00:40.300
A normal click adds the second device in
this view.

00:00:40.300 --> 00:00:43.540
Check Current Selection: both names should
be present.

00:00:44.953 --> 00:00:48.353
Open the three dots in Current Selection and
choose Save Group.

00:00:49.373 --> 00:00:51.653
The New Group Name box proposes My Group.

00:00:55.827 --> 00:01:00.527
Replace that with Demo - Cooling - 13 Nov

00:01:00.527 --> 00:01:02.567
2026, then choose Save.

00:01:03.487 --> 00:01:07.987
The Created message confirms the action, and
the Cooling group appears in My

00:01:07.987 --> 00:01:08.307
Groups.

00:01:09.307 --> 00:01:13.827
This saves a selection of existing devices;
it does not create another meter.

00:01:14.633 --> 00:01:16.473
Clear Current Selection.

00:01:16.473 --> 00:01:20.333
Notice that the saved Cooling group remains
available.

00:01:20.333 --> 00:01:23.693
Clearing the current selection and removing
a saved group are different

00:01:23.693 --> 00:01:24.093
actions.

00:01:25.233 --> 00:01:29.453
Search for Workstations sockets, press
Enter, and select the matching result.

00:01:31.220 --> 00:01:35.280
Add Main Lightning from the tree, keeping
that existing name exactly as shown.

00:01:36.560 --> 00:01:40.860
Confirm the two names, choose Save Group
again, and name this selection

00:01:40.860 --> 00:01:45.080
Demo - Workplace - 13 Nov 2026.

00:01:45.880 --> 00:01:49.400
After saving, both groups are listed, ready
for reuse.

00:01:50.067 --> 00:01:52.267
Choose Cooling in My Groups.

00:01:52.267 --> 00:01:55.947
Current Selection identifies the group and
its two cooling devices.

00:01:57.207 --> 00:02:01.487
Consumption shows a row for each device, as
well as the totals presented by

00:02:01.487 --> 00:02:01.867
that view.

00:02:02.907 --> 00:02:06.387
Now choose Readings, then Last Reading.

00:02:06.387 --> 00:02:09.187
The Cooling pair remains selected as we move
to this view.

00:02:10.287 --> 00:02:13.447
Open My Groups and switch to Workplace.

00:02:13.447 --> 00:02:18.367
The selected names change to Workstations
sockets and Main Lightning, without

00:02:18.367 --> 00:02:19.967
rebuilding the pair from the tree.

00:02:20.667 --> 00:02:25.647
Use Consumption, Electricity, Total to
inspect that pair over a

00:02:25.647 --> 00:02:26.527
reporting period.

00:02:27.547 --> 00:02:31.207
Choose Cooling again when you want the
cooling loads back.

00:02:31.207 --> 00:02:35.067
The benefit is a familiar, named selection
that you can recall quickly.

00:02:36.267 --> 00:02:39.287
Check its members and reporting dates
whenever you change views.

00:02:39.933 --> 00:02:43.693
We created these groups only for this
demonstration, so we will remove them

00:02:43.693 --> 00:02:44.073
now.

00:02:45.133 --> 00:02:48.533
Open the three dots on the Cooling group
itself and choose Remove Group.

00:02:54.007 --> 00:02:57.067
Read the confirmation: the action cannot be
undone.

00:02:58.387 --> 00:03:00.647
Check the group you started from, then
choose Delete.

00:03:02.500 --> 00:03:06.280
Cooling disappears from My Groups, leaving
Workplace.

00:03:06.280 --> 00:03:09.740
In this view, Main air conditioning and
Rooms air conditioning remain

00:03:09.740 --> 00:03:13.980
selected, while the saved group name
disappears from Current Selection.

00:03:14.567 --> 00:03:18.227
Select Workplace and confirm Workstations
sockets and Main Lightning.

00:03:26.027 --> 00:03:30.127
Open that group's menu, choose Remove Group,
then confirm Delete.

00:03:31.387 --> 00:03:33.887
My Groups is empty again.

00:03:33.887 --> 00:03:37.927
The two device names remain selected without
the saved group name, and their

00:03:37.927 --> 00:03:39.727
data is still available in the view.

00:03:40.667 --> 00:03:43.947
Earlier, Clear Selection left a saved group
available.

00:03:45.387 --> 00:03:48.887
Here, Remove Group removed the saved entry.

00:03:48.887 --> 00:03:50.467
Choose the control that matches your
intention.

00:03:50.467 --> 00:03:55.327
After reloading Consumption and expanding My
Groups,

00:03:55.327 --> 00:03:59.327
both temporary groups are still absent and
the selected devices have

00:03:59.327 --> 00:04:00.167
consumption rows.

00:04:01.327 --> 00:04:06.267
Recheck the reporting dates after a refresh:
retaining a device selection

00:04:06.267 --> 00:04:09.367
does not guarantee that the date range
stayed the same.

00:04:09.867 --> 00:04:14.847
Give a saved selection a recognisable name,
confirm its members, then use the

00:04:14.847 --> 00:04:17.887
menus to move to the information you need.

00:04:17.887 --> 00:04:21.207
Current Selection is your quick check on
scope.

00:04:21.207 --> 00:04:25.327
Groups make repeated reviews easier to
reach, while clear names and a

00:04:25.327 --> 00:04:27.847
deliberate cleanup keep the navigation
useful.
