1 00:00:00,000 --> 00:00:04,320 If you regularly review the same set of loads, a saved group can save you from 2 00:00:04,320 --> 00:00:07,440 rebuilding that selection each time. 3 00:00:07,440 --> 00:00:11,160 In this lesson, we will create two temporary groups for a small commercial 4 00:00:11,160 --> 00:00:15,820 building, use them in Last Reading and Consumption, then remove both saved 5 00:00:15,820 --> 00:00:17,160 groups. 6 00:00:17,160 --> 00:00:19,420 The existing device names stay as they are. 7 00:00:20,360 --> 00:00:22,480 We start by opening My Groups. 8 00:00:22,480 --> 00:00:24,460 Its list is empty in this demonstration. 9 00:00:32,400 --> 00:00:37,100 With Main air conditioning selected, click Rooms air conditioning as well. 10 00:00:37,100 --> 00:00:40,300 A normal click adds the second device in this view. 11 00:00:40,300 --> 00:00:43,540 Check Current Selection: both names should be present. 12 00:00:44,953 --> 00:00:48,353 Open the three dots in Current Selection and choose Save Group. 13 00:00:49,373 --> 00:00:51,653 The New Group Name box proposes My Group. 14 00:00:55,827 --> 00:01:00,527 Replace that with Demo - Cooling - 13 Nov 15 00:01:00,527 --> 00:01:02,567 2026, then choose Save. 16 00:01:03,487 --> 00:01:07,987 The Created message confirms the action, and the Cooling group appears in My 17 00:01:07,987 --> 00:01:08,307 Groups. 18 00:01:09,307 --> 00:01:13,827 This saves a selection of existing devices; it does not create another meter. 19 00:01:14,633 --> 00:01:16,473 Clear Current Selection. 20 00:01:16,473 --> 00:01:20,333 Notice that the saved Cooling group remains available. 21 00:01:20,333 --> 00:01:23,693 Clearing the current selection and removing a saved group are different 22 00:01:23,693 --> 00:01:24,093 actions. 23 00:01:25,233 --> 00:01:29,453 Search for Workstations sockets, press Enter, and select the matching result. 24 00:01:31,220 --> 00:01:35,280 Add Main Lightning from the tree, keeping that existing name exactly as shown. 25 00:01:36,560 --> 00:01:40,860 Confirm the two names, choose Save Group again, and name this selection 26 00:01:40,860 --> 00:01:45,080 Demo - Workplace - 13 Nov 2026. 27 00:01:45,880 --> 00:01:49,400 After saving, both groups are listed, ready for reuse. 28 00:01:50,067 --> 00:01:52,267 Choose Cooling in My Groups. 29 00:01:52,267 --> 00:01:55,947 Current Selection identifies the group and its two cooling devices. 30 00:01:57,207 --> 00:02:01,487 Consumption shows a row for each device, as well as the totals presented by 31 00:02:01,487 --> 00:02:01,867 that view. 32 00:02:02,907 --> 00:02:06,387 Now choose Readings, then Last Reading. 33 00:02:06,387 --> 00:02:09,187 The Cooling pair remains selected as we move to this view. 34 00:02:10,287 --> 00:02:13,447 Open My Groups and switch to Workplace. 35 00:02:13,447 --> 00:02:18,367 The selected names change to Workstations sockets and Main Lightning, without 36 00:02:18,367 --> 00:02:19,967 rebuilding the pair from the tree. 37 00:02:20,667 --> 00:02:25,647 Use Consumption, Electricity, Total to inspect that pair over a 38 00:02:25,647 --> 00:02:26,527 reporting period. 39 00:02:27,547 --> 00:02:31,207 Choose Cooling again when you want the cooling loads back. 40 00:02:31,207 --> 00:02:35,067 The benefit is a familiar, named selection that you can recall quickly. 41 00:02:36,267 --> 00:02:39,287 Check its members and reporting dates whenever you change views. 42 00:02:39,933 --> 00:02:43,693 We created these groups only for this demonstration, so we will remove them 43 00:02:43,693 --> 00:02:44,073 now. 44 00:02:45,133 --> 00:02:48,533 Open the three dots on the Cooling group itself and choose Remove Group. 45 00:02:54,007 --> 00:02:57,067 Read the confirmation: the action cannot be undone. 46 00:02:58,387 --> 00:03:00,647 Check the group you started from, then choose Delete. 47 00:03:02,500 --> 00:03:06,280 Cooling disappears from My Groups, leaving Workplace. 48 00:03:06,280 --> 00:03:09,740 In this view, Main air conditioning and Rooms air conditioning remain 49 00:03:09,740 --> 00:03:13,980 selected, while the saved group name disappears from Current Selection. 50 00:03:14,567 --> 00:03:18,227 Select Workplace and confirm Workstations sockets and Main Lightning. 51 00:03:26,027 --> 00:03:30,127 Open that group's menu, choose Remove Group, then confirm Delete. 52 00:03:31,387 --> 00:03:33,887 My Groups is empty again. 53 00:03:33,887 --> 00:03:37,927 The two device names remain selected without the saved group name, and their 54 00:03:37,927 --> 00:03:39,727 data is still available in the view. 55 00:03:40,667 --> 00:03:43,947 Earlier, Clear Selection left a saved group available. 56 00:03:45,387 --> 00:03:48,887 Here, Remove Group removed the saved entry. 57 00:03:48,887 --> 00:03:50,467 Choose the control that matches your intention. 58 00:03:50,467 --> 00:03:55,327 After reloading Consumption and expanding My Groups, 59 00:03:55,327 --> 00:03:59,327 both temporary groups are still absent and the selected devices have 60 00:03:59,327 --> 00:04:00,167 consumption rows. 61 00:04:01,327 --> 00:04:06,267 Recheck the reporting dates after a refresh: retaining a device selection 62 00:04:06,267 --> 00:04:09,367 does not guarantee that the date range stayed the same. 63 00:04:09,867 --> 00:04:14,847 Give a saved selection a recognisable name, confirm its members, then use the 64 00:04:14,847 --> 00:04:17,887 menus to move to the information you need. 65 00:04:17,887 --> 00:04:21,207 Current Selection is your quick check on scope. 66 00:04:21,207 --> 00:04:25,327 Groups make repeated reviews easier to reach, while clear names and a 67 00:04:25,327 --> 00:04:27,847 deliberate cleanup keep the navigation useful.