WEBVTT

00:00:00.000 --> 00:00:04.600
This Expertpower walkthrough shows how to find a meter, choose a useful

00:00:04.600 --> 00:00:08.920
dashboard, set the dates and read the resulting charts.

00:00:08.920 --> 00:00:13.360
We will use Detailed View as our main example, then look more closely at a recorded

00:00:13.360 --> 00:00:17.240
data view. Billing is covered separately.

00:00:17.240 --> 00:00:21.580
Customer, site and device names have been masked for this recording.

00:00:21.580 --> 00:00:24.660
The measurements themselves have not been replaced.

00:00:24.660 --> 00:00:27.360
Start by checking that you are in Manager.

00:00:27.360 --> 00:00:29.680
The menus across the top choose what you want to see.

00:00:29.680 --> 00:00:34.640
The Device Tree on the left chooses whose data you are looking at.

00:00:34.640 --> 00:00:39.460
These are two different decisions: first the view, then the device.

00:00:39.460 --> 00:00:44.760
Open the Device Tree and use the plus beside the customer to expand its sites.

00:00:44.760 --> 00:00:48.080
Expand the required site to reveal the meter.

00:00:48.080 --> 00:00:50.780
A minus collapses a branch again.

00:00:50.780 --> 00:00:54.980
Collapsing a branch does not itself clear the selected meter.

00:00:54.980 --> 00:00:57.180
Click the meter name to select it.

00:00:57.180 --> 00:01:01.560
Check the green row and, above the tree, Current Selection.

00:01:01.560 --> 00:01:06.090
Read the customer, site and device together.

00:01:06.090 --> 00:01:10.120
Selecting a similar-looking name at a different site can give you a perfectly valid

00:01:10.120 --> 00:01:12.400
chart for the wrong meter.

00:01:12.400 --> 00:01:17.060
In this interface, clicking an already selected meter toggles it off.

00:01:17.060 --> 00:01:21.140
If you see No selection, choose the required meter again.

00:01:21.140 --> 00:01:24.900
Before investigating any unusual result, confirm the selection first.

00:01:25.600 --> 00:01:30.080
The ordinary menu route is Dashboard, then Analysis, then Detailed

00:01:30.080 --> 00:01:34.920
View. The breadcrumb at the top confirms the page you reached.

00:01:34.920 --> 00:01:40.120
The names and options you see may depend on your access and the selected device.

00:01:40.120 --> 00:01:44.680
Use the actual menu available in your account rather than assuming every dashboard will

00:01:44.680 --> 00:01:48.960
look identical. Detailed View brings several useful displays

00:01:48.960 --> 00:01:54.020
together. At the top we can see a maximum-demand value and the time associated

00:01:54.020 --> 00:01:59.480
with it. Below, Energy Details plots the selected quantities over the

00:01:59.480 --> 00:02:04.820
chosen range. Further down are the Load Profile and Weekly Distribution.

00:02:04.820 --> 00:02:08.280
We will use these populated panels through the walkthrough.

00:02:08.280 --> 00:02:13.320
A tile marked No data to display does not, by itself, tell you why the information

00:02:13.320 --> 00:02:18.700
is absent. Check the device, dates and relevant source data before treating

00:02:18.700 --> 00:02:21.600
that tile as evidence of a fault.

00:02:21.600 --> 00:02:26.700
Cost panels are masked here because this overview is about viewing measurements.

00:02:26.700 --> 00:02:32.020
Before reading a number, check three things: the selected meter, the dates at the top

00:02:32.020 --> 00:02:35.040
and the quantity and units in the panel.

00:02:35.040 --> 00:02:39.760
A demand value in kilowatts answers a different question from accumulated energy in

00:02:39.760 --> 00:02:43.860
kilowatt-hours. Also look at the timestamp.

00:02:43.860 --> 00:02:49.260
A maximum found within an earlier date range is historical information; it is not a

00:02:49.260 --> 00:02:52.220
claim about what the meter is drawing now.

00:02:52.220 --> 00:02:54.780
Keep those checks together as you move between views.

00:02:55.367 --> 00:02:59.407
Click the green date range at the top to open Date selection.

00:02:59.407 --> 00:03:03.807
The panel contains quick choices and separate From and To controls.

00:03:03.807 --> 00:03:08.787
You can see shortcuts such as Today, Past Week and Past Month, as well as Pick

00:03:08.787 --> 00:03:12.487
Day, Pick Month, Pick Quarter and Pick Year.

00:03:12.487 --> 00:03:17.487
A quick preset and a named calendar month are different ways to choose the period.

00:03:17.487 --> 00:03:19.127
Check their endpoints.

00:03:19.127 --> 00:03:23.387
Choose the one that matches the question you are answering.

00:03:23.387 --> 00:03:27.047
For a complete named month, use Pick Month.

00:03:27.047 --> 00:03:29.527
Choose the year, then the month.

00:03:29.527 --> 00:03:34.667
In our October example, the controls show the first of October at midnight through to

00:03:34.667 --> 00:03:37.047
the first of November at midnight.

00:03:37.047 --> 00:03:40.247
Read both endpoints before applying them.

00:03:40.247 --> 00:03:43.947
The ending boundary is the start of the following month, rather than a guessed

00:03:43.947 --> 00:03:47.127
late-evening time on the last day.

00:03:47.127 --> 00:03:51.367
Apply updates the selection while keeping the panel available.

00:03:51.367 --> 00:03:55.687
Apply and Close updates it and returns you to the dashboard.

00:03:55.687 --> 00:03:59.747
After the panel closes, check the green range again and let the charts finish

00:03:59.747 --> 00:04:04.927
loading. That final check matters: an edited field

00:04:04.927 --> 00:04:09.967
or a highlighted calendar cell is only an intermediate step.

00:04:09.967 --> 00:04:14.267
The range shown on the loaded dashboard is the context you will use to interpret its

00:04:14.267 --> 00:04:19.287
results. For this recording we use the calendar controls.

00:04:19.287 --> 00:04:24.267
During preparation, typing a slash-formatted date was interpreted differently from the

00:04:24.267 --> 00:04:26.827
displayed format in this session.

00:04:26.827 --> 00:04:31.007
If you type dates in your own account, verify the calendar and final range before

00:04:31.007 --> 00:04:35.907
relying on them. Do not assume that the way you entered a date proves how the

00:04:35.907 --> 00:04:37.187
application understood it.

00:04:37.600 --> 00:04:42.740
A month is useful for an overview, but it can hide the shape of an individual day.

00:04:42.740 --> 00:04:46.320
Open Date selection again and choose Pick Day.

00:04:46.320 --> 00:04:50.440
Pick Day provides year, month and numbered-day controls.

00:04:50.440 --> 00:04:54.100
Choose the required year and month before choosing the day.

00:04:54.100 --> 00:04:58.260
The From and To calendars below show the resulting boundaries.

00:04:58.260 --> 00:05:02.420
The same day number appears in every month, so check the headings as well as the

00:05:02.420 --> 00:05:07.400
number. Use a short, known period when you want to inspect a particular pattern.

00:05:07.400 --> 00:05:12.520
In this example we choose a day within the recorded month and the following midnight

00:05:12.520 --> 00:05:17.540
as the end. The time controls beside the calendars let you see the exact

00:05:17.540 --> 00:05:19.900
start and end times.

00:05:19.900 --> 00:05:23.260
Leave them at midnight for a complete-day example.

00:05:23.260 --> 00:05:27.800
For a partial-day question, choose the required times and check both boundaries before

00:05:27.800 --> 00:05:31.440
applying the range. The point is to make the period explicit.

00:05:31.440 --> 00:05:36.900
A comparison between two screenshots is difficult to interpret if one covers a

00:05:36.900 --> 00:05:40.340
whole day and the other covers only part of it.

00:05:40.340 --> 00:05:45.120
A low total can reflect a shorter window rather than a change in the load.

00:05:45.120 --> 00:05:49.200
Similarly, a partial current day should not be compared casually with a completed

00:05:49.200 --> 00:05:54.680
day. Apply and Close, confirm the resulting date range and wait

00:05:54.680 --> 00:05:57.140
for the requested view to load.

00:05:57.140 --> 00:06:01.260
If the new display is empty, first check the selection and period.

00:06:01.260 --> 00:06:05.960
Do not turn an empty result into a claim of zero consumption.

00:06:05.960 --> 00:06:10.360
Once you have inspected the shorter period, you can return to a month using the same

00:06:10.360 --> 00:06:15.260
calendar controls. The meter selection and the date range are checks you repeat

00:06:15.260 --> 00:06:16.900
whenever the question changes.

00:06:17.500 --> 00:06:20.780
The date range chooses the overall window.

00:06:20.780 --> 00:06:25.800
The adjacent resolution control chooses how the dashboard groups the display.

00:06:25.800 --> 00:06:29.700
Those controls work together, but they do different jobs.

00:06:29.700 --> 00:06:33.460
Open the resolution menu to see the available choices.

00:06:33.460 --> 00:06:38.380
In this view they include thirty minutes, Hours, Days, Weeks and

00:06:38.380 --> 00:06:43.660
Months. For a monthly overview, Days makes it easier to compare one

00:06:43.660 --> 00:06:48.800
day with the next. Weeks reduces the number of plotted groups and helps you see a

00:06:48.800 --> 00:06:53.720
broader pattern. A shorter resolution can reveal detail that disappears

00:06:53.720 --> 00:06:57.400
when values are grouped over a longer period.

00:06:57.400 --> 00:07:02.700
A longer resolution can make an extended period easier to scan.

00:07:02.700 --> 00:07:06.900
Choose a scale that answers the question, then read the labels on the resulting

00:07:06.900 --> 00:07:11.600
chart. Do not interpret a weekly bar as if it were a single day's

00:07:11.600 --> 00:07:16.720
result. The arrows beside the date range move the displayed period backwards

00:07:16.720 --> 00:07:22.160
or forwards. Watch the range change when you use them; do not assume

00:07:22.160 --> 00:07:25.880
that an arrow always means one calendar day.

00:07:25.880 --> 00:07:30.280
Its useful meaning comes from the active period and the resulting dates.

00:07:30.280 --> 00:07:34.540
After moving, let the dashboard update and check that the meter has remained the one

00:07:34.540 --> 00:07:39.880
you intended. A practical routine is to begin broadly, identify the

00:07:39.880 --> 00:07:44.660
period of interest, then narrow the dates and resolution.

00:07:44.660 --> 00:07:49.400
Keep a note of the range and units with any screenshot you retain.

00:07:49.400 --> 00:07:53.900
When comparing two views, use comparable periods and grouping.

00:07:53.900 --> 00:07:58.240
The screen may offer a wide range of choices, but more plotted points do not

00:07:58.240 --> 00:08:01.240
automatically make the answer clearer.

00:08:01.240 --> 00:08:04.960
Select the amount of detail that lets you see the pattern you are trying to understand.

00:08:05.667 --> 00:08:08.867
Return to the populated Energy Details chart.

00:08:08.867 --> 00:08:11.167
Begin with its axes and legend.

00:08:11.167 --> 00:08:13.847
The horizontal axis shows the time groups.

00:08:13.847 --> 00:08:17.867
The legend names the plotted quantities and includes their units.

00:08:17.867 --> 00:08:22.787
In this example you can see import and export energy, demand and other available

00:08:22.787 --> 00:08:28.167
quantities. Several series may be present together, so colour alone is not

00:08:28.167 --> 00:08:30.687
enough to identify a measurement.

00:08:30.687 --> 00:08:33.007
Match the colour to its label.

00:08:33.007 --> 00:08:37.807
Clicking a legend entry shows or hides that series in the chart.

00:08:37.807 --> 00:08:41.747
A greyed entry indicates that it is not currently displayed.

00:08:41.747 --> 00:08:46.507
Use this to reduce clutter while comparing a small set of quantities, and turn the

00:08:46.507 --> 00:08:48.907
series back on when you need it.

00:08:48.907 --> 00:08:53.327
Hiding a series changes the presentation; it does not delete the meter's

00:08:53.327 --> 00:08:58.767
records. A line or bar that disappears after a legend click should not be described as

00:08:58.767 --> 00:09:03.487
missing data. Move the pointer over a plotted point to inspect its

00:09:03.487 --> 00:09:07.547
tooltip. Read the date or time and the quantity together with the

00:09:07.547 --> 00:09:11.747
value. Then move the pointer clear so the chart is visible

00:09:11.747 --> 00:09:17.127
again. A tooltip is useful for a specific point; the wider chart

00:09:17.127 --> 00:09:19.907
is useful for the surrounding pattern.

00:09:19.907 --> 00:09:23.367
Neither view should lose its time and unit context.

00:09:23.367 --> 00:09:28.047
The All Days control also offers individual weekdays in this view.

00:09:28.047 --> 00:09:31.407
This can help you focus on a recurring part of the week.

00:09:31.407 --> 00:09:36.707
Check that filter when a chart seems to contain fewer days than expected, and return to

00:09:36.707 --> 00:09:40.287
All Days for the complete selected period.

00:09:40.287 --> 00:09:45.307
A filter, a hidden series and a genuinely absent record are different

00:09:45.307 --> 00:09:48.487
explanations for something not appearing.

00:09:48.487 --> 00:09:52.207
Check the display controls before drawing a conclusion about the underlying

00:09:52.207 --> 00:09:52.727
measurements.

00:09:53.467 --> 00:09:55.747
Scroll down to Load Profile.

00:09:55.747 --> 00:10:01.107
This chart shows how the available power quantities vary through the selected period.

00:10:01.107 --> 00:10:06.587
Read the legend before interpreting a trace: active power, apparent power, reactive

00:10:06.587 --> 00:10:10.967
power and power factor are separate quantities.

00:10:10.967 --> 00:10:15.007
Notice that the axes can have different units and scales.

00:10:15.007 --> 00:10:19.087
A power-factor trace should not be read against a power axis.

00:10:19.087 --> 00:10:22.187
Use the same broad-to-narrow approach here.

00:10:22.187 --> 00:10:25.807
A month lets you see repeating daily patterns.

00:10:25.807 --> 00:10:29.747
A shorter range helps you inspect the timing of a change.

00:10:29.747 --> 00:10:34.727
The graph can show an observation worth investigating, but a peak or a negative value

00:10:34.727 --> 00:10:38.367
does not identify its cause on its own.

00:10:38.367 --> 00:10:43.427
Keep the selected record, dates and quantity with the observation, then check the

00:10:43.427 --> 00:10:48.027
appropriate source view before diagnosing the installation.

00:10:48.027 --> 00:10:53.067
Further down, Weekly Distribution arranges the displayed values by weekday

00:10:53.067 --> 00:10:58.127
and time of day. The colour shading helps you find patterns across that

00:10:58.127 --> 00:11:03.627
table. Read a row and column together rather than treating the colour as a complete

00:11:03.627 --> 00:11:07.687
answer. A dash is not a measured zero.

00:11:07.687 --> 00:11:12.927
If a cell or period needs investigation, return to a narrower dated view and inspect

00:11:12.927 --> 00:11:15.187
the relevant records.

00:11:15.187 --> 00:11:19.687
The sensitivity and heatmap controls change how this table is

00:11:19.687 --> 00:11:25.107
presented. They can help you see a pattern, but changing the colour treatment does

00:11:25.107 --> 00:11:27.707
not change the measurements.

00:11:27.707 --> 00:11:32.347
Keep the actual values, labels and chosen range in view.

00:11:32.347 --> 00:11:37.587
This is a useful starting point for asking when something happens.

00:11:37.587 --> 00:11:42.827
Establishing why it happens requires the appropriate data and evidence beyond the

00:11:42.827 --> 00:11:43.327
dashboard.

00:11:43.867 --> 00:11:48.087
For a closer look at what the meter recorded, use Readings, then Data

00:11:48.087 --> 00:11:53.087
Logs. Confirm the meter again and choose the available log from the Datalogs

00:11:53.087 --> 00:11:57.667
list. The selected log determines the columns and quantities you

00:11:57.667 --> 00:12:02.247
see. Data Log 1 in this demonstration contains its own recorded

00:12:02.247 --> 00:12:07.107
parameters; do not assume another meter will have the same list.

00:12:07.107 --> 00:12:11.147
Use a short date range, then compare the graph with the timestamped Details

00:12:11.147 --> 00:12:16.007
table. Read the spacing between the actual timestamps before

00:12:16.007 --> 00:12:19.067
describing the recording interval.

00:12:19.067 --> 00:12:24.407
This view includes a record at each midnight boundary, so check the first and last

00:12:24.407 --> 00:12:28.107
timestamps rather than assuming a row count proves a complete

00:12:28.107 --> 00:12:33.527
day. A dashboard resolution is a display choice; it

00:12:33.527 --> 00:12:37.347
does not by itself prove how the meter's log was configured.

00:12:37.347 --> 00:12:41.187
We will work through interval records in a separate lesson.

00:12:41.187 --> 00:12:45.787
Return to Detailed View when you want the dashboard context again.

00:12:45.787 --> 00:12:51.187
The checks remain the same: the correct customer, site and device; the required From

00:12:51.187 --> 00:12:55.847
and To boundaries; the displayed resolution; and the active series or weekday

00:12:55.847 --> 00:13:01.127
filter. Use the ordinary menu route first, then use the tree and display

00:13:01.127 --> 00:13:03.547
controls to refine the view.

00:13:03.547 --> 00:13:08.807
You can now navigate to a populated dashboard, choose an explicit period and inspect

00:13:08.807 --> 00:13:13.567
its charts without changing customer configuration.

00:13:13.567 --> 00:13:16.847
The chapters let you return directly to each task.

00:13:16.847 --> 00:13:20.627
The shorter lessons will take these steps one at a time.

00:13:20.627 --> 00:13:25.307
Billing will follow in a separate walkthrough, using the checked Network Operations

00:13:25.307 --> 00:13:25.567
procedures.

